IDT72275

Features: • Choose among the following memory organizations: IDT72275 - 32,768 x 18 IDT72285 - 65,536 x 18• Pin-compatible with the IDT72255LA/72265LA SuperSync FIFOs• 10ns read/write cycle time (6.5ns access time)• Fixed, low first word data latency time• Auto power ...

product image

IDT72275 Picture
SeekIC No. : 004372402 Detail

IDT72275: Features: • Choose among the following memory organizations: IDT72275 - 32,768 x 18 IDT72285 - 65,536 x 18• Pin-compatible with the IDT72255LA/72265LA SuperSync FIFOs• 10ns read/wr...

floor Price/Ceiling Price

Part Number:
IDT72275
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/6/10

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Choose among the following memory organizations:
   IDT72275 - 32,768 x 18
   IDT72285 - 65,536 x 18
• Pin-compatible with the IDT72255LA/72265LA SuperSync FIFOs
• 10ns read/write cycle time (6.5ns access time)
• Fixed, low first word data latency time
• Auto power down minimizes standby power consumption
• Master Reset clears entire FIFO
• Partial Reset clears data, but retains programmable settings
• Retransmit operation with fixed, low first word data latency time
• Empty, Full and Half-Full flags signal FIFO status
• Programmable Almost-Empty and Almost-Full flags, each flag
   can default to one of two preselected offsets
• Program partial flags by either serial or parallel means
• Select IDT Standard timing (using EF and FF flags) or First
   Word Fall Through timing (using OR and IR flags)
• Output enable puts data outputs into high impedance state
• Easily expandable in depth and width
• Independent Read and Write Clocks (permit reading and writing simultaneously)
• Available in the 64-pin Thin Quad Flat Pack (TQFP) and the 64-
   pin Slim Thin Quad Flat Pack (STQFP)
• High-performance submicron CMOS technology
• Industrial temperature range (-40°C to +85°C) is available



Pinout

  Connection Diagram


Specifications

Symbol Rating Commercial Unit
VTERM Terminal Voltage with respect to GND 0.5 to +7 V
TSTG Storage Temperature 55 to +125 ° C
IOUT DC Output Current 50 to +50 mA

NOTE:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.



Description

The IDT72275 are exceptionally deep, high speed, CMOS First-In- First-Out (FIFO) memories with clocked read and write controls. These FIFOs offer numerous improvements over previous SuperSync FIFOs, including the following:
• The limitation of the frequency of one clock input with respect to the other has been removed. The Frequency Select pin (FS) has been removed, thus it is no longer necessary    to select which of the two clock inputs, RCLK or WCLK, is running at the higher frequency.
• The period required by the retransmit operation is now fixed and short.
• The first word data latency period, from the time the first word is written to an empty FIFO to the time it can be read, is now fixed and short. (The variable clock cycle counting    delay associated with the latency period found on previous SuperSync devices of the IDT72275 has been eliminated on this SuperSync family.)




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Motors, Solenoids, Driver Boards/Modules
Potentiometers, Variable Resistors
Optical Inspection Equipment
Soldering, Desoldering, Rework Products
Hardware, Fasteners, Accessories
View more