IC SRAM 72KBIT 15NS 100TQFP
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Manufacturer: | IDT, Integrated Device Technology Inc | ||
Format - Memory: | RAM | Memory Type: | SRAM - Dual Port, Asynchronous | ||
Available Set Gain : | 5.9 dB | Memory Size: | 72K (4K x 18) | ||
Speed: | 15ns | Interface: | Parallel | ||
Voltage - Supply: | 4.5 V ~ 5.5 V | Operating Temperature: | 0°C ~ 70°C | ||
Package / Case: | 100-LQFP | Supplier Device Package: | 100-TQFP (14x14) |
The IDT7034S15PF is one of the IDT7034S series.The IDT7034 is a high-speed 4K x 18 Dual-Port Static RAM. The IDT7034 is designed to be used as a stand-alone 72K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 36-bit or more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 36-bit or wider memory system applications results in full-speed, error-free operation without the need for additional discrete logic.
Features of the IDT7034S15PF are:(1)True Dual-Ported memory cells which allow simultaneous reads of the same memory location; (2)High-speed access;Commercial: 15/20ns (max.); (3)Low-power operation: IDT7034S;Active: 850mW (typ.);Standby: 5mW (typ.); IDT7034L;Active: 850mW (typ.);Standby: 1mW (typ.); (4)Separate upper-byte and lower-byte control for multiplexed bus compatibility; (5)IDT7034 easily expands data bus width to 36 bits or moreusing the Master/Slave select when cascading more than one device; (6)M/S = H for BUSY output flag on Master;M/S = L for BUSY input on Slave; (7)nterrupt Flag; (8)On-chip port arbitration logic; (9)Full on-chip hardware support of semaphore signaling between ports; (10)Fully asynchronous operation from either port; (11)Battery backup operation?2V data retention; (12)TTL-compatible, single 5V (±10%) power supply; (13)Available in 100-pin Thin Quad Flatpack; (14)ndustrial temperature range (?40°C to +85°C) is available for selected speeds.
The absolute maximum ratings of the IDT7034S15PF can be summarized as:(1)Terminal Voltage with Respect to GND:-0.5 to +7.0 V; (2)TemperatureUnder Bias:-55 to +125 ; (3)StorageTemperature:-55 to +125 ; (4)DC OutputCurrent:50 mA.If you want to know more information such as the electrical characteristics, please download the datasheet in www.seekic.com or www.chinaicmart.com.
Technical/Catalog Information | IDT7034S15PF |
Vendor | IDT, Integrated Device Technology Inc |
Category | Undefined Category |
Lead Free Status | Contains Lead |
RoHS Status | RoHS Non-Compliant |
Other Names | IDT7034S15PF IDT7034S15PF |