IDT29FCT53CT

NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the evice. This is a stress rating only and functional operation of the device at these or any other conditions above those icated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed VCC by +0.5V unless otherwise noted.
2. Input and VCC terminals only.
3. Outputs and I/O terminals only.

The IDT29FCT53CT are 8-bit registered transceivers built using an advanced dual metal CMOS technology. Two 8-bit back-to-back registers store data flowing in both directions between two bidirectional buses. Separate clock, clock enable and 3-state output enable signals are provided for each register. Both A outputs and B outputs are guaranteed to sink 64mA.
The IDT29FCT53CT are non-inverting options of the IDT29FCT53AT/BT/CT.
The IDT29FCT53CT has balanced drive outputs with current limiting resistors. This offers low ground bounce,
minimal undershoot and controlled output fall times-reducing the need for external series terminating resistors. The
IDT29FCT53CT part is a plug-in replacement for IDT29FCT52T part.