Features: • Packaged as 8 pin SOIC• ICS' lowest cost PLL clock plus reference• Produces common computer frequencies• Input crystal frequency typically 14.3182 MHz• Output clock frequencies up to 100 MHz• Low jitter - 40 ps one sigma• Compatible with all po...
ICS513: Features: • Packaged as 8 pin SOIC• ICS' lowest cost PLL clock plus reference• Produces common computer frequencies• Input crystal frequency typically 14.3182 MHz• Outp...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Conditions |
Minimum |
Typical |
Maximum |
Units |
Supply Voltage, VDD | Referenced to GND |
7 |
V | ||
Inputs | Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Clock Output | Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Ambient Operating Temperature |
0 |
70 |
|||
Soldering Temperature | Max of 10 seconds |
260 |
|||
Storage temperature |
-65 |
150 |
The ICS513 LOCO™ is the most cost effective way to generate a high quality, high frequency clock output from a 14.31818 MHz crystal or clock input. The name LOCO stands for LOw Cost Oscillator, as it is designed to replace crystal oscillators in many electronic systems. Using Phase-Locked-Loop (PLL) techniques, the device uses a standard, inexpensive crystal to produce output clocks up to 100 MHz.
Stored in the chip's ROM is the ability to generate 5 different output frequencies, allowing one chip to work in different speed processor systems.
The ICS513 also has a power down mode that turns off the clock outputs when both select pins are low.In this mode, the internal PLL is not running