Features: • Packaged as 8 pin SOIC or die• Upgrade of popular ICS502 with:- changed multiplier table- higher operating frequencies• Zero ppm multiplication error• Easy to cascade with other 5xx series• Input crystal frequency of 5 - 27 MHz• Input clock frequency...
ICS512: Features: • Packaged as 8 pin SOIC or die• Upgrade of popular ICS502 with:- changed multiplier table- higher operating frequencies• Zero ppm multiplication error• Easy to cas...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Conditions |
Minimum |
Typical |
Maximum |
Units |
Supply Voltage, VDD | Referenced to GND |
7 |
V | ||
Inputs | Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Clock Output | Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Ambient Operating Temperature |
0 |
70 |
|||
ICS512MI only |
-40 |
85 |
|||
Soldering Temperature | Max of 10 seconds |
260 |
|||
Storage temperature |
-65 |
150 |
The ICS512 LOCO™ is the most cost effective way to generate a high quality, high frequency clock output and a reference clock from a lower frequency crystal or clock input. The name LOCO stands for LOw Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked-Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 200 MHz. With a reference output,this chip plus an inexpensive crystal can replace two oscillators.
Stored in the chip's ROM of the ICS512 is the ability to generate nine different popular multiplication factors,allowing one chip to output many common frequencies (see page 2).