Features: • Packaged as 16 pin narrow SOIC or die• Input crystal frequency of 5 - 27 MHz• Input clock frequency of 5 - 52 MHz• Uses low-cost crystal• Differential PECL output clock frequencies up to 200 MHz• Duty cycle of 49/51• 3.3 V or 5.0 V±10% operatin...
ICS507-02: Features: • Packaged as 16 pin narrow SOIC or die• Input crystal frequency of 5 - 27 MHz• Input clock frequency of 5 - 52 MHz• Uses low-cost crystal• Differential PECL ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Conditions |
Minimum |
Typical |
Maximum |
Units |
Supply Voltage, VDD | Referenced to GND |
7 |
V | ||
Inputs | Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Clock Output | Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Ambient Operating Temperature |
0 |
70 |
|||
ICS512MI only |
-40 |
85 |
|||
Soldering Temperature | Max of 10 seconds |
260 |
|||
Storage temperature |
-65 |
150 |
The ICS507-01 and ICS507-02 are inexpensive ways to generate a low jitter 155.52 MHz (or other high speed) differential PECL clock output from a low frequency crystal input. Using Phase-Locked-Loop (PLL) techniques, the devices use a standard fundamental mode crystal to produce output clocks up to 200 MHz.
Stored in each chip's ROM is the ability to generate a selection of different multiples of the input reference frequency, including an exact 155.52 MHz clock from common crystals. For lowest jitter and phase noise on a 155.52 MHz clock, a 19.44 MHz crystal and the x8 selection can be used.