Features: • Packaged as 8 pin SOIC or die• ICS' lowest cost PLL clock plus reference• Zero ppm multiplication error• Easy to cascade with other 5xx series• Input crystal frequency of 5 - 27 MHz• Input clock frequency of 2 - 50 MHz• Output clock frequencies...
ICS502: Features: • Packaged as 8 pin SOIC or die• ICS' lowest cost PLL clock plus reference• Zero ppm multiplication error• Easy to cascade with other 5xx series• Input crysta...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Conditions |
Minimum |
Typical |
Maximum |
Units |
Supply Voltage, VDD | Referenced to GND |
7 |
V | ||
Inputs | Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Clock Output | Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Ambient Operating Temperature |
0 |
70 |
|||
ICS512MI only |
-40 |
85 |
|||
Soldering Temperature | Max of 10 seconds |
260 |
|||
Storage temperature |
-65 |
150 |
The ICS502 LOCO™ is the most cost effective way to generate a high quality, high frequency clock output and a reference from a low frequency crystal or clock input. The name LOCO stands for LOw Cost Oscillator, as it is esigned to replace crystal oscillators in most electronic systems. Using Phase-Locked-Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz.
Stored in the chip's ROM of the ICS502 is the ability to generate 6 different multiplication factors, allowing one chip to output many common frequencies (see page 2).