Features: • 8-pin SOIC package• Highly accurate frequency generation• M/N Multiplier PLL: M = 1...2048, N = 1...1024• Output clock frequencies up to 200 MHz• Spread spectrum capability for lower system EMI•Center or Down Spread up to 4% total• Selectable 3...
ICS343: Features: • 8-pin SOIC package• Highly accurate frequency generation• M/N Multiplier PLL: M = 1...2048, N = 1...1024• Output clock frequencies up to 200 MHz• Spread spe...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Condition |
Min. |
Typ. |
Max. |
Units |
Supply Voltage, VDD | Referenced to GND |
7 |
V | ||
Inputs | Referenced to GND |
-0.5 |
VDD+ 0.5 |
V | |
Clock Outputs | Referenced to GND |
-0.5 |
VDD+ 0.5 |
V | |
Storage Temperature |
-65 |
150 |
|||
Soldering Temperature | Max 10 seconds |
260 |
|||
Junction Temperature |
125 |
The ICS343 is a low cost, triple-output, field programmable clock synthesizer. The ICS343 can generate three output frequencies from 250 kHz to 200 MHz,using up to three independently configurable PLLs.The outputs may employ Spread Spectrum techniques to reduce system electro-magnetic interference (EMI).
Using ICS' VersaClock™ software to configure the PLL and output, the ICS343 contains a One-Time Programmable (OTP) ROM to allow field programmability. Using Phase-Locked Loop (PLL) techniques, the device runs from a standard fundamental mode, inexpensive crystal,or clock. It can replace multiple crystals and oscillators,saving board space and cost.
The ICS348-22 also has a power down feature that tri-states the clock outputs and turns off the PLLs when the PDTS pin is taken low.
The ICS343 is also available in factory-programmed custom versions for high-volume applications.