Features: • 8-pin SOIC package• Highly accurate frequency generation• M/N Multiplier PLL: M = 1...2048, N = 1...1024• Output clock frequencies up to 200 MHz• Four ROM locations for frequency and spread selection• Spread spectrum capability for lower system EMI...
ICS341: Features: • 8-pin SOIC package• Highly accurate frequency generation• M/N Multiplier PLL: M = 1...2048, N = 1...1024• Output clock frequencies up to 200 MHz• Four ROM l...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Condition |
Min. |
Typ. |
Max. |
Units |
Supply Voltage, VDD | Referenced to GND |
-0.5 |
7 |
V | |
Inputs | Referenced to GND |
-0.5 |
VDD+ 0.5 |
V | |
Clock Outputs | Referenced to GND |
-0.5 |
VDD+ 0.5 |
V | |
Storage Temperature |
-65 |
150 |
|||
Soldering Temperature | Max 10 seconds |
260 |
|||
Junction Temperature |
125 |
The ICS341 is a low cost, single-output, field programmable clock synthesizer. The ICS341 can generate an output frequency from 250 kHz to 200 MHz and may employ Spread Spectrum techniques to reduce system electro-magnetic interference (EMI).
Using ICS' VersaClock™ software to configure the PLL and output, the ICS341 contains a One-Time Programmable (OTP) ROM to allow field programmability. Programming features include 4 selectable configuration registers.
The device employs Phase-Locked Loop (PLL) techniques to run from a standard fundamental mode,inexpensive crystal, or clock. It can replace multiple crystals and oscillators, saving board space and cost.
The ICS341 also has a power-down feature that tri-states the clock outputs and turns off the PLLs when thePDTS pin is taken low.
The ICS341 is also available in factory programmed custom versions for high-volume applications.