ICL7660SCBA

The ICL7660SCBA is one member of the ICL7660S series.The ICL7660S Super Voltage Converter is a monolithic CMOS voltage conversion IC that guarantees significant performance advantages over other similar devices. It is a direct replacement for the industry standard ICL7660 offering an extended operating supply voltage range up to 12V, with lower supply current. No external diode is needed for the ICL7660S. In addition, a Frequency Boost pin has been incorporated to enable the user to achieve lower output impedance despite using smaller capacitors. All improvements are highlighted in the Electrical Specifications section.Critical parameters are guaranteed over the entire commercial, industrial and military temperature ranges.

Features of the ICL7660SCBA are:(1)guaranteed lower max supply current for all temperature ranges; (2)wide operating voltage range 1.5V to 12V; (3)100% tested at 3V; (4)no external diode over full temperature and voltage range; (5)boost pin (pin 1) for higher switching frequency; (6)guaranteed minimum power efficiency of 96%; (7)improved minimum open circuit voltage conversion efficiency of 99%; (8)improved SCR latchup protection; (9)simple conversion of +5V logic supply to ±5V supplies; (10)simple voltage multiplication Vout = (-)nVin; (11)easy to use - requires only 2 external non-critical passive components; (12)improved direct replacement for industry standard ICL7660 and other second source devices.

The absolute maximum ratings of the ICL7660SCBA can be summarized as:(1)supply voltage:18V;(2)output source current:50mA;(3)storage temperature:-65 to 150;(4)lead temperature:300.The ICL7660S performs supply voltage conversion from positive to negative for an input range of 1.5V to 12V,resulting in complementary output voltages of -1.5V to -12V.Only 2 non-critical external capacitors are needed for the charge pump and charge reservoir functions. The ICL7660S can be connected to function as a voltage doubler and will generate up to 22.8V with a 12V input.It can also be used as a voltage multiplier or voltage divider.The chip contains a series DC power supply regulator, RC oscillator, voltage level translator, and four output power MOS switches.The oscillator,when unloaded,oscillates at a nominal frequency of 10kHz for an input supply voltage of 5.0V.This frequency can be lowered by the addition of an external capacitor to the "OSC" terminal, or the oscillator of the ICL7660SCBA may be over-driven by an external clock.