ICE3B0365L

Output Isolation: Isolated
Package / Case: 8-DIP (0.300", 7.62mm)
Packaging: Tube
Voltage - Output: 650V
Frequency Range: 61 ~ 73kHz
Manufacturer: Infineon Technologies
Operating Temperature: -25°C ~ 130°C
Supplier Device Package: PG-DIP-8
Power (Watts): 22W
Voltage - Input: 8.5 V ~ 22 V
Series: CoolSET®F3


Features:

• 650V avalanche rugged CoolMOS™ with built in switchable Startup Cell
• Active Burst Mode for lowest Standby Power @ light load controlled by Feedback Signal
• Fast load jump response in Active Burst Mode
• 67/100kHz internally fixed switching frequency
• Latched Off Mode for Overtemperature Detection
• Latched Off Mode for Overvoltage Detection
• Latched Off Mode for Short Winding Detection
• Auto Restart Mode for Overload and Open Loop
• Auto Restart Mode for VCC Undervoltage
• Blanking Window for short duration high current
• User defined Soft Start
• Minimum of external components required
• Max Duty Cycle 72%
• Overall tolerance of Current Limiting < ±5%
• Internal PWM Leading Edge Blanking
• Soft driving for low EMI


Specifications

Parameter		Symbol	Limit Values		Unit	Remarks
			min.	max.
Drain Source Voltage		VDS	-	650	V
Pulse drain current, tp limited by Tjmax	ICE3B0365L	I D_Puls1	-	1.6	A
	ICE3A1065L	I D_Puls2	-	3.4	A
	ICE3A1565L	I D_Puls3	-	6.0	A
Avalanche energy, repetitive tAR limited by max. Tj=1501)	ICE3B0365L	EAR1	-	0.005	mJ
	ICE3A1065L	EAR2	-	0.07	mJ
	ICE3A1565L	EAR3	-	0.15	mJ
Avalanche current, repetitive tAR limited by max. Tj=150	ICE3B0365L	IAR1	-	0.3	A
	ICE3A1065L	IAR2	-	1.0	A
	ICE3A1565L	IAR3	-	1.5	A
VCC Supply Voltage		VVCC	-0.3	22	V
FB Voltage		VFB	-0.3	6.5	V
SoftS Voltage		VSoftS	-0.3	6.5	V
CS Voltage		VCS	-0.3	6.5	V
Junction Temperature		Tj	-40	150
Storage Temperature		TS	-55	150
Thermal Resistance Junction -Ambient		RthJA	-	90	K/W	PG-DIP-8-6
ESD Capability(incl. Drain Pin)		VESD	-	3	K/W	Human body model 2)

1) Repetitive avalanche causes additional power losses that can be calculated as P_AV=E_AR*f
2) According to EIA/JESD22-A114-B (discharging a 100pF capacitor through a 1.5k series resistor)


Description

The new generation CoolSET™-F3 Controller of the ICE3B0365L provides Active Burst Mode to reach the lowest Standby Power Requirements <100mW at no load. As the controller is always active during Active Burst Mode, there is an immediate response on load jumps without any black out in the SMPS. In Active Burst Mode the ripple of the output voltage can be reduced <1%. Furthermore, to increase the robustness and safety of the system, the device enters into Latched Off Mode in the cases of Overtemperature, Overvoltage or Short Winding. The Latched Off Mode of the ICE3B0365L can only be reset by disconnecting the main line. Auto Restart Mode is entered for cases like open loop or overload. By means of an internal precise peak current limitation, the dimension of the transformer and the secondary diode can be lowered which leads to more cost efficiency. An adjustable blanking window prevents the IC from entering Auto Restart Mode or Active Burst Mode unintentionally in case of high load jumps.

Parameters:

Technical/Catalog Information	ICE3B0365L
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Packaging	Tube
Package / Case	8-DIP
Power (Watts)	22W
Voltage - Input	9 ~ 22 V
Voltage - Output	650V
Frequency Range	61 ~ 73kHz
Operating Temperature	-40°C ~ 150°C
Output Isolation	Isolated
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	ICE3B0365L ICE3B0365L