IC1001

Operating Temperature Range . . .. . . . . 0 - 70
Storage Temperature Range . . . . -55 to + 150
Voltage from any pin to V_SS .  . .  -0.5 to V_CC + 0.5
Voltage from V_CC to V_SS . . ... . . . .  . . -0.5 to +6.5
*Stresses above those listed could cause permanent damage to the device. This is a stress rating only and functional operation of the device at any other condition above those indicated in the operation sections of this specification is not implied.

The Innotech Systems IC1001 Infrared Receiver/Decoder Integrated Circuit provides a convenient means of enabling microprocessor or microcontroller-based systems to receive infrared remote control signals. The ICI1001 receives and decodes the infrared signal generated by the matching ISI101B handheld "Customizable Universal Remote Control."

The IC1001 inputs serial IR data from an infrared detector and provides a 6-bit parallel word indicating row and column location of the remote control key pressed. An Infrared Signal Detected strobe remains active as long as the key on the remote control is held down, and will remain active 75 ms after key release. The parallel bus data will remain latched until the subsequent key press.