HT82M9AEE

· Flexible total solution for applications that combine PS/2 and low-speed USB interface, such as mice,joysticks, and many others
· USB Specification Compliance
-Conforms to USB specification V1.1
-Conforms to USB HID specification V1.1
· Supports 1 low-speed USB control endpoint and 2 interrupt endpoint
· Each endpoint has 8×8 bytes FIFO
· Integrated USB transceiver
· 3.3V regulator output
· External 6MHz or 12MHz ceramic resonator or crystal
· 8-bit RISC microcontroller, with 4K×15 program memory (000H~FFFH)
· 224 bytes RAM (20H~FFH)
· 128×8 data EEPROM
· 6MHz/12MHz internal CPU clock
· 4-level stacks
· Two 8-bit indirect addressing registers
· One 16-bit programmable timer counter with overflow interrupt (shared with PA7, vector 0CH)
· One USB interrupt input (vector 04H)
· HALT function and wake-up feature reduce power consumption
· PA0~PA7, PB4/SDA and PB7/SCL support wake-up function
· Internal Power-On reset (POR)
· Watchdog Timer (WDT)
· 16 I/O ports
· 20/24-pin SOP package

Supply Voltage ...........................V_SS-0.3V to V_SS+6.0V
Storage Temperature ..............................-50to 125
Input Voltage..............................V_SS-0.3V to V_DD+0.3V
Operating Temperature..................................0to 70
IOL Total .............................................................150mA
IOH Total............................................................-100mA
Total Power Dissipation .....................................500mW
Note: These are stress ratings only. Stresses exceeding the range specified under Absolute Maximum Ratings may
cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability.

The USB MCU OTP body is suitable for USB mouse and USB joystick devices. HT82M9AEE consists of a Holtek high performance 8-bit MCU core for control unit, built-in USB SIE, 4Kx5 ROM and 224 bytes data RAM.

The mask version HT82M9AAE is fully pin and functionally compatible with the OTP version HT82M9AEE device.

There are two dice in the HT82M9AEE/HT82M9AAE package: one is the HT82M9AE/HT82M9AA MCU, the other is a 128x bits EEPROM used for data memory purpose. The two dice are wrie-bonded to from HT82M9AEE/HT82M9AAE.