HT6740

Supply Voltage (V_DD) ...............................................6V
Operating Temperature ..............................0 to 70
Input Voltage .............................V_SS-0.3V to V_DD+0.3V
Storage Temperature ...........................-50 to 125
Supply Voltage (V_PA) ..........................................12.5V

The HT6740 is an RF transponder IC with 13.56MHz RF carrier, which provides a low cost batteryless transponder solution when combined with an external inductor.

The HT6740 inductor and internal capacitor form an LC tank which induce voltage from the radiated 13.56MHz carrier signal generated from the reader antenna.

HT6740 has a built-in low power RC oscillator which is activated if the induced carrier field strength is high enough to supply the operating current and the response signal (pre-programmed in the OTP memory) is serially transmitted out. The response data is transmitted using PWM/ASK modulation. Modulation of 13.56MHz is accomplished by damping the LC tank with a fixed baud rate.
The transmission information is stored in a 17 bits one time programmable memory OTP, with a 6-bit check sum (up to 11 bits reserved for customer). The effective detection range for a small sized antenna is 2cm~10cm which is dependent on antenna format & reader design.
The larger the antenna loop used the longer the detection range. HT6740 is advisable to use larger antenna to attain a 15 cm detection range.

Implementing Holteks advanced OTP and low power technology, HT6740 offers a very cost effective solution for RF contactless detection system.

A code area of 11 bits (max.) wide is provided so customers can program the device HT6740 using the specified programmer supplied by Holtek. The pre-programmed ICs are also available upon customer's request.

The HT6740 has a built-in anti-collision function. Customers can choose with anti-collision or with non anti-collision function in the program software tool supplied by Holtek.