HT12D

` Operating voltage: 2.4V~12V
`Low power and high noise immunity CMOS technology
`Low standby current
`Capable of decoding 12 bits of information
`Pair with Holtek's 2<sup>12</sup> series of encoders
`Binary address setting
`Received codes are checked 3 times
`Address/Data number combination
`HT12D: 8 address bits and 4 data bits
`HT12F: 12 address bits only
`Built-in oscillator needs only 5% resistor
`Valid transmission indicator
`Easy interface with an RF or an infrared transmission medium
`Minimal external components

The 2¹² decoders are a series of CMOS LSIs for remote control system applications. HT12D are paired with Holtek's 2¹² series of encoders (refer to the encoder/decoder cross reference table). For proper operation, a pair of encoder/decoder with the same number of addresses and data format should be chosen.

The decoders HT12D receive serial addresses and data from a programmed 2¹² series of encoders that are transmitted by a carrier using an RF or an IR transmission medium. They compare the serial input data three times continuously with their local addresses. If no error or unmatched codes are found, the input data codes are decoded and then transferred to the output pins. The VT pin also goes high to indicate a valid transmission.

The 2¹² series of decoders are capable of decoding informations that consist of N bits of address and 12-N bits of data. Of this series, the HT12D is arranged to provide 8 address bits and 4 data bits, and HT12F is used to decode 12 bits of address information.