Position: Home  > All Categories> Integrated Circuits (ICs) > HSSR-8400

HSSR-8400

Features: • Compact Solid-State Bidirectional Switch• Normally-Off Single-Pole Relay Function (1 Form-A)• 400 V Output Withstand Voltage in Both Polarities at 25°C• 150/300 mA Current Ratings (See Schematic for Connection A & B)• Low Input Current; CMOS Compatibil...

product image

HSSR-8400 Picture
See larger image
SeekIC No. : 004366491 Detail

HSSR-8400: Features: • Compact Solid-State Bidirectional Switch• Normally-Off Single-Pole Relay Function (1 Form-A)• 400 V Output Withstand Voltage in Both Polarities at 25°C• 150/300 m...

HSSR-8400 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
HSSR-8400
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/2/15

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Compact Solid-State Bidirectional Switch
• Normally-Off Single-Pole Relay Function (1 Form-A)
• 400 V Output Withstand Voltage in Both Polarities at 25°C
• 150/300 mA Current Ratings (See Schematic for Connection A & B)
• Low Input Current; CMOS Compatibility
• Very Low On-Resistance: 6 W Typical at 25°C
• ac/dc Signal & Power Switching
• Input-to-Output Momentary Withstand Insulation Voltage: 2500 Vac, 1 Minute
• 16-kV ESD Immunity: MILSTD- 883, Method 3015
• CSA Approved
• UL 508 Recognized


Application

• Modems
• Telecommunication Switching Equipment
• Telecommunication Test Instruments
• Reed Relay Replacement
• 110/220 Vac Load Driver
• Industrial Relay Coil Driver


Specifications

Storage Temperature ................................................... -55 to+125
Operating Temperature - TA .......................................... -40 to +85
Case Temperature - TC .......................................................+105°C[1]
Lead Solder Temperature ..260 for 10 S (1.6 mm below seating plane)
Average Input Current - IF ..........................................................20 mA
Repetitive Peak Input Current - IF ...............................................40 mA
                                              (Pulse Width 1 ms; duty cycle 50%)
Transient Peak Input Current - IF .............................................100 mA
                                            (Pulse Width 200 ms; duty cycle 1%)
Reverse Input Voltage - VR ............................................................ 3 V
Input Power Dissipation ............................................................40 mW
Output Voltage (TA = 25°C)
    Connection A - VO ....................................................400 to +400 V
    Connection B - VO ........................................................0 to +400 V
Average Output Current - Figure 3 (TA = 25°C, TC 70°C)
    Connection A - IO .................................................................0.15 A
    Connection B - IO ...................................................................0.3 A
Single Shot Peak Output Current
    (100 ms pulse width, TA = 25°C, IF = 10 mA)
    Connection A - IO ...................................................................1.0 A
    Connection B - IO ...................................................................2.0 A
Output Power Dissipation ...................................................750 mW[2]
Infrared and Vapor Phase Reflow Temperature
    (Option #300) .........................................See Fig. 1, Thermal Profile


Description

The HSSR-8400 consists of a high-voltage circuit, optically coupled with a Light-Emitting Diode (LED). This device is a solid-state replacement for singlepole, normally-open (1 Form A) electromechanical relays used for general purpose switching of signals and low-power ac/dc loads. The relay turns on (contact closes) with a minimum input current, IF, of 5 mA through the input LED. The relay turns off (contact opens) with an input voltage, VF, of 0.8 V or less. The detector contains a high speed photosensitive FET driver circuit and two high voltage MOSFETs.

This relay's logic-level input con trol and very low typical output on-resistance of 6 W make HSSR-8400 suitable for switching of audio frequency signals in telecom applications. Connection A, as shown in the schematic, allows the relay to switch either ac or dc loads. In this configuration, the 150 mA output current rating allows it to switch small loads that are driven from 110 Vac and  220 Vac power lines. Connection B, with the polarity and pin configuration as indicated in the schematic, allows the relay to switch dc loads only. The advantage of Connection B is that  the on-resistance is significantly reduced and the output current capability increases by a factor of two.

The electrical and switching characteristics of the HSSR-8400 are specified from -40°C to +85°C.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Optical Inspection Equipment
AA924
A21K4B
Transformers
TM-09210
BV222-1-00992
Filters
PICO2205A
PICO2204A
Semiconductor Modules
2DI300A-050-03
7MBR25SA-120-50
Industrial Controls, Meters
SGDM-15ADA
41AA1600E
Tapes, Adhesives
803
AC452-2
View more