Position: Home  > All Categories> Integrated Circuits (ICs) > HSSR-8060

HSSR-8060

Features: • Compact Solid-State Bidirectional Switch• Normally-Off Single-Pole Relay Function (1 Form A)• 60 V Output Withstand Voltage in Both Polarities at 25°C• 0.75/1.5 Amp Current Ratings (See Schematic for Connections A & B)• Low Input Current; CMOS Compatib...

product image

HSSR-8060 Picture
See larger image
SeekIC No. : 004366489 Detail

HSSR-8060: Features: • Compact Solid-State Bidirectional Switch• Normally-Off Single-Pole Relay Function (1 Form A)• 60 V Output Withstand Voltage in Both Polarities at 25°C• 0.75/1.5 A...

HSSR-8060 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
HSSR-8060
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/3/13

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Compact Solid-State Bidirectional Switch
• Normally-Off Single-Pole Relay Function (1 Form A)
• 60 V Output Withstand  Voltage in Both Polarities at 25°C
• 0.75/1.5 Amp Current Ratings (See Schematic for Connections A & B)
• Low Input Current; CMOS Compatibility
• Very Low On-resistance: 0.4 W Typical at 25°C
• ac/dc Signal and Power Switching
• Input-to-Output Momentary Withstand Insulation Voltage: 2500 Vac, 1 Minute
• 16-kV ESD Immunity: MILSTD- 883, Method 3015
• IEEE Surge Withstand Capability (IEEE STD 472-1974)
• CSA Approved
• UL 508 Approved


Application

• Programmable Logic Controllers
• Telecommunication Switching Equipment
• Reed Relay Replacement
• 28 Vdc, 24 Vac, 48 Vdc Load Driver
• Industrial Relay Coil Driver


Specifications

Storage Temperature ................................................... -55 to+125
Operating Temperature - TA .......................................... -40 to +85
Case Temperature - TC .........................................................+105[1]
Average Input Current - IF.......................................................... 20 mA
Repetitive Peak Input Current - IF ............................................... 40 mA
                                               (Pulse Width 1 ms; duty cycle 50%)
Transient Peak Input Current - IF ...............................................100 mA
                                             (Pulse Width 200 ms; duty cycle 1%)
Reverse Input Voltage - VR ..............................................................3 V
Input Power Dissipation .............................................................40 mW
Output Voltage (TA = 25)
    Connection A - VO .......................................................-60 to +60 V
    Connection B - VO .......................................................... 0 to +60 V
Average Output Current - Figure 3 (TA = 25°C, TC 70°C)
    Connection A - IO .................................................................0.75 A
    Connection B - IO ....................................................................50 A
Single Shot Peak Output Current
    (100 ms pulse width, TA = 25°C, IF = 10 mA)
    Connection A - IO ................................................................ 3.75 A
    Connection B - IO ...................................................................7.0 A
Output Power Dissipation ....................................................750 mW[2]
Lead Solder Temperature .260 for 10 S (1.6 mm below seating plane)
Infrared and Vapor Phase Reflow Temperature
    (Option #300) ......................................... See Fig. 1, Thermal Profile


Description

The HSSR-8060 consists of a high-voltage circuit, optically coupled with a light emitting diode (LED). This device is a solid-state replacement for singlepole, normally-open (1 Form A) electromechanical relays used for general purpose switching of signals and low-power loads. The relay turns on (contact closes) with a minimum input current, IF, of 5 mA through the input LED.

The relay turns off (contact opens) with an input voltage, VF, of 0.8 V or less. The detector HSSR-8060 contains a high speed photosensitive ET driver circuit and two high voltage MOSFETs. This relay's logic level input control and very low typical output on-resistance of 0.4 W makes it suitable for both ac and dc loads. Connection A, as shown in the schematic, allows the relay to  switch either ac or dc loads.

Connection B, with the polarity and pin configuration as indicated in the schematic, allows the relay to switch dc loads only. The  advantage of Connection B is that the on-resistance is significantly reduced, and the output current capability increases by a factor of two.

The electrical and switching characteristics of the HSSR-8060 are specified from -40°C to +85°C.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Transformers
TM-09210
BV222-1-00992
Switches
US32DMRJ
HBGQ22P-11ET
Computers, Office - Components, Accessories
DS-4008HCI
LB104V03(A1)
Hardware, Fasteners, Accessories
MF-A02
LMS700KF07
Capacitors
GRM188R71H103KA01D
GRM21BR71H104KA01L
Optical Inspection Equipment
AA924
A21K4B
View more