Features: `Fully Compliant to IrDA Physical Layer Speciication 1.4 from 9.6 kbit/s to 115.2 kbit/s (SIR)`Interfaces with IrDA Compliant IR Transceiver`Miniature Module Size with 16-pin Quad-Flat-No Lead (QFN) Package Height : 0.8 mm Length : 4.0 mm Depth : 4.0 mm`Used in Conjunction with Standar...
HSDL - 7002: Features: `Fully Compliant to IrDA Physical Layer Speciication 1.4 from 9.6 kbit/s to 115.2 kbit/s (SIR)`Interfaces with IrDA Compliant IR Transceiver`Miniature Module Size with 16-pin Quad-Flat-No...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Symbol |
Min. |
Max. |
Units |
Storage Temperature |
TS |
-65 |
+150 |
|
Operating Temperature |
TA |
-40 |
+85 |
|
Output Current |
IO |
-20 |
15 |
mA |
Power Dissipation[1] |
PMAX |
0.46 |
W | |
Input/Output Voltage[2] |
VI /V O |
-0.5 |
Vcc+0.5 |
V |
Power Supply Voltage |
V CC |
-0.5 |
7.0 |
V |
Electrostatic Protection |
VESD |
4000 |
V |
The HSDL-7002 modulates and demodulates electrical pulses from HSDL-3201 IrDA® transceiver module and other IrD A®compliant transceivers. The HSDL-7002 can be used with a microcontroller/microprocessor that has a serial communic ation interface (UART).
Prior to communication, the processor selects the transmission baud rate. Serial data is then transmitted or received at the prescribed data rate.
The HSDL-7002 consists or two state machines -the SIR (Serial InfraRed) Encode and SIR Decode blocks. It also ontains a sequential block Clock Divide that synthesizes the required internal signal.
The HSDL-7002 can be placed into the Internal Clock Mode or External Clock Mode. An external crystal is needed for the Internal Clock Mode. In applications where the external 16XCLK signal is provided, a crystal is not needed.
There are wo data transmission modes. Data can be trans mitter and received in either a standard 3/16 modulation de or a 1.63 |ìs pulse mode