HS2020

The HS2020 has the following features including Digitally Programmable 1 to 128;Gain Nonlinearity 0.002%;Gain Accuracy 0.002%;Full Power Bandwidth 100 kHz;MIL-STD-883 Rev. C, Level B Screening Available.

The HS2020 is a precision hybrid amplifier that features high speed low offset performance in addition to being user programmable for gains from 1 to 128. A gain range from 1 to 128 can be achieved from binary (TTL) inputs to the HS 2020 in 8 steps. This gives the user a dynamic range of 19 bits with analog input steps from20 mV to 10V. The HS 2020 uses the precision JFET OP-15 amplifier along with a laser trimmed stable nichrome thin film resistor network. The HS2020 features very low 100 V offset voltage which yields much less than 1/2 LSB in a 12 bit ADC. The excellent performance over temperature is achieved by combining a proven circuit configuration with the benefits of state-of-the-art hybrid manufacturing to achieve low cost, small size, and high reliability.

The products described in this document like HS2020 are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite).

At present there is not too much information about this model.If you are willing to find more  about HS2020 , please pay attention to our web! We will promptly update the relevant information.