Features: `Accurate RMS-to-DC Conversion: DC to 3.9 GHz[1]`Input Dynamic Range of >70 dB: -60 to +10 dBm in 50 Ohms`Waveform & Modulation Independent: GSM / CDMA / TDMA`Linear-in-dB Output: Scaled 37 mV/dB`Operates from 4.5 to 5.5V from -40 to +85`Power-Down Mode`Compact 4x4mm Leadless SMT ...
HMC610LP4E: Features: `Accurate RMS-to-DC Conversion: DC to 3.9 GHz[1]`Input Dynamic Range of >70 dB: -60 to +10 dBm in 50 Ohms`Waveform & Modulation Independent: GSM / CDMA / TDMA`Linear-in-dB Output: S...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe HMC600LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a...
DescriptionThe HMC601LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a...
Supply Voltage | 5.6V |
RF Input Power | 20 dBm |
Equivalent Voltage | 2.25 Vrms |
Channel / Junction Temperature | 125 |
Continuous Pdiss (T = 85) (Derate 22.72 mW/ above 85) |
0.91 Watts |
Thermal Resistance (Rth) (junction to ground paddle) |
44.02 /W |
Storage Temperature | -65 to +150 |
Operating Temperature | -40 to +85 |
The HMC610LP4(E) is a true RMS power detector capable of providing a ±1 dB measurement dynamic range of more than 70 dB. It converts any RF input signal at its differential input, regardless of modulation or waveform complexity, to an accurately scaled linearin- dB output response that is equivalent to the Root- Mean-Square (RMS) of the input waveform.
For normal operation, the RMSOUT pin of HMC610LP4(E) is shorted to the VSET input, and will provide a nominal logarithmic slope of 37 mV/dB and an intercept of -70 dBm for frequencies up to 2 GHz; other slopes are achieved with external resistors connected between RMSOUT and VSET pins. Temperature stability is excellent with ±0.5 dB error from -40 to 85 maintained from 100 MHz to 3.9 GHz.