Features: Noise Figure: 1.1 dBOutput IP3: +31 dBmGain: 20 dBLow Loss & Failsafe Bypass PathSingle Supply: +3V or +5V50 Ohm Matched Input / OutputApplicationThe HMC605LP3 / HMC605LP3E is ideal for:• Wireless Infrastructure• Customer Premise Equipment• Fixed Wireless• WiM...
HMC605LP3: Features: Noise Figure: 1.1 dBOutput IP3: +31 dBmGain: 20 dBLow Loss & Failsafe Bypass PathSingle Supply: +3V or +5V50 Ohm Matched Input / OutputApplicationThe HMC605LP3 / HMC605LP3E is ideal fo...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe HMC600LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a...
DescriptionThe HMC601LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a...
Drain Bias Voltage (Vdd) | +8.0 Vdc |
RF Input Power LNA Mode (RFin)(Vdd = +5.0 Vdc) Bypass Mode |
+15 dBm +30 dBm |
Channel Temperature | 150 |
Continuous Pdiss (T = 85 ) (derate 13.7 mW/ above 85 ) |
890 mW |
Thermal Resistance (channel to ground paddle) |
73 /W |
Storage Temperature | -65 to +150 |
Operating Temperature | -40 to +85 |
The HMC605LP3 / HMC605LP3E are versatile, high dynamic range GaAs MMIC Low Noise Amplifi ers that integrate a low loss LNA bypass path on the IC. The amplifi er is ideal for WiBro & WiMAX receivers operating between 2.3 and 2.7 GHz and provides 1.1 dB noise fi gure, 20 dB of gain and +31 dBm output IP3 from a single supply of +5.0V @ 74 mA. Input and output return losses are 14 and 15 dB respectively with no external matching components required. A single control line (Vctl) is used to switch between LNA mode and a low 2.0 dB loss bypass mode and reduces the current consumption to 10 A. The HMC605LP3 / HMC605LP3E is failsafe and will default to the bypass mode with no DC power applied.