Features: Noise Figure: 1.5 dBOutput IP3: +26 dBmGain: 15 dBIntegrated Low Loss LNA Bypass PathSingle Supply: +3V or +5V50 Ohm Matched Output/Input16 Lead 3x3mm QFN Package: 9 mm2ApplicationThe HMC604LP3 / HMC604LP3E is ideal for:• WiMAX/C-band Radio• Fixed Wireless• Tower Mounte...
HMC604LP3: Features: Noise Figure: 1.5 dBOutput IP3: +26 dBmGain: 15 dBIntegrated Low Loss LNA Bypass PathSingle Supply: +3V or +5V50 Ohm Matched Output/Input16 Lead 3x3mm QFN Package: 9 mm2ApplicationThe HMC6...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe HMC600LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a...
DescriptionThe HMC601LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a...
Drain Bias Voltage (Vdd) | +8.0 Vdc |
RF Input Power (RFIN) LNA Mode (Vdd = +5.0 Vdc) Bypass Mode |
+15 dBm +30 dBm |
Channel Temperature (Tc) | 150 |
Continuous Pdiss (T = 85) (derate 13 mW/°C above 85) |
850 mW |
Thermal Resistance (channel to ground paddle) |
76.9/W |
Storage Temperature | -65 to +150 |
Operating Temperature | -40 to +85 |
The HMC604LP3(E) is a versatile, high dynamic range GaAs MMIC Low Noise Amplifi er that integrates a low loss LNA bypass mode on the IC. The HMC604LP3(E) amplifi er is ideal for WiMAX & C-band Radio receivers operating between 4.8 and 6.0 GHz and provides 1.5 dB noise fi gure, 15 dB of gain and +26 dBm IP3 from a single supply of +5V @ 42mA. Input and output return losses are 12 and 14 dB respectively with no external matching components required. A single control line (0/Vdd) is used to switch between LNA mode and a low loss bypass mode which reduces the current consumption to 10 A.