Features: `Noise Figure: 2.8 dB`Gain: 20 dB`OIP3: 23.5 dBm`Single Supply: +3V @80 mA`50 Ohm Matched Input/Output`Small Size: 2.54 x 0.98 x 0.10 mmApplicationThe HMC566 is ideal for use as a LNA or driver amplii er for:`Point-to-Point Radios`Point-to-Multi-Point Radios & VSAT`Test Equipment and...
HMC566: Features: `Noise Figure: 2.8 dB`Gain: 20 dB`OIP3: 23.5 dBm`Single Supply: +3V @80 mA`50 Ohm Matched Input/Output`Small Size: 2.54 x 0.98 x 0.10 mmApplicationThe HMC566 is ideal for use as a LNA or d...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·360° of Continuous Phase Control·40 dB of Continuous Gain Control·-162 dBm/Hz Output No...
Drain Bias Voltage (Vdd1, 2, 3, 4) | +3.5 Vdc |
RF Input Power (RFin)(Vdd = +3.0 Vdc) | +5 dBm |
Channel Temperature | 175 |
Continuous Pdiss (T= 85 ) (derate 9.6 mW/C above 85 ) |
0.82 W |
Thermal Resistance (channel to die bottom) |
104.2 /W |
Storage Temperature | -65 to +150 |
Operating Temperature | -55 to +85 |
The HMC566 is a high dynamic range GaAs PHEMT MMIC Low Noise Amplii er (LNA) chip which operates from 29 to 36 z. The HMC566 provides 20 dB of small signal gain, 2.8 dB of noise i gure and output IP3 of 23 dBm across the operating . This selfbiased LNA is ideal for hybrid and MCM assemblies due to its compact size, positive gain slope single +3V upply operation, and DC blocked RF I/Os.All data is measured with the chip in a 50 Ohm test i xture connected via two .025 (1 mil) diameter bondwires of minimal length 0.31 mm (12 mil).