Features: · Wide IF Bandwidth: DC - 3.5 GHz· Image Rejection: 17.5 dB· High LO to RF Isolation: 33 dB· High Input IP3: +23 dBm· Passive Topology: No DC Bias Required· Compact Size: 1.49mm x 1.12mm x 0.1mmApplicationThe HMC556 is ideal for:• Microwave Radio• Satellite Communication Syst...
HMC556: Features: · Wide IF Bandwidth: DC - 3.5 GHz· Image Rejection: 17.5 dB· High LO to RF Isolation: 33 dB· High Input IP3: +23 dBm· Passive Topology: No DC Bias Required· Compact Size: 1.49mm x 1.12mm x...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·360° of Continuous Phase Control·40 dB of Continuous Gain Control·-162 dBm/Hz Output No...
RF Input | +19 dBm |
IF1 / IF2 Input | +24 dBm |
LO Drive | +27dBm |
Channel Temperature | 150 |
Continuous Pdiss (T=85 ) (derate 8.95mW/ above 85 ) |
582mW |
Thermal Resistance (RTH) (channel to die bottom) |
111.6 /W |
Storage Temperature | -65 to +150 |
Operating Temperature | -55 to +85 |
ESD Sensitivity (HBM) | Class 1A |
The HMC556 is a compact I/Q MMIC mixer which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The chip utilizes two double balanced mixer cells and a 90 degree hybrid fabricated in a GaAs MESFET process. All data shown below is taken with the chip mounted in a 50 Ohm test fi xture and includes the effects of 1 mil diameter x 12 mil length bond wires on each port. A low frequency quadrature hybrid was used to produce a 100 MHz USB IF output. This compact mixer is a much smaller alternative to hybrid style Image Reject Mixers and Single Sideband Upconverter assemblies, and is ideal for microwave radio applications. The redundant IF port connections located on opposing sides of the HMC556 chip, provide added layout fl exibility.