Features: ·Single Supply: Vcc = +5V·Low Noise Figure: 1.3 dB·High Output IP3: +21 dBm·No External Matching Required·External Filter Access·3x3 mm Leadless SMT PackageApplication• Automotive Telematics• GPS Antenna Modules / Boosters• Location Based Portables• Satellite Navi...
HMC548LP3E: Features: ·Single Supply: Vcc = +5V·Low Noise Figure: 1.3 dB·High Output IP3: +21 dBm·No External Matching Required·External Filter Access·3x3 mm Leadless SMT PackageApplication• Automotive Te...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·360° of Continuous Phase Control·40 dB of Continuous Gain Control·-162 dBm/Hz Output No...
Drain Bias Voltage (Vcc) | +7.0 Vdc |
RF Input Power (RFin)(Vcc = +5.0 Vdc) | -5 dBm |
Junction Temperature | 150 |
Continuous Pdiss (T = 85) (derate 14 mW/ above 85) |
0.942 W |
Thermal Resistance (junction to ground paddle) |
69/W |
Storage Temperature | -65 to +150 |
Operating Temperature | -40 to +85 |
ESD Sensitivity (HBM) | Class 1A |
The HMC548LP3 & HMC548LP3E are comprised of two internally matched SiGe HBT MMIC low noise amplifi er stages housed in 3x3 mm leadless SMT packages. The unique topology of the HMC548LP3 & HMC548LP3E provides interstage access allowing the designer to place a bandpass fi lter between the two amplifi er stages. This fi ltering approach enables the receiver to reject nearby blocking signals such as those emitted from cellular and 3G hand-helds, without incurring the noise fi gure degradation associated with a high rejection pre-fi lter. When combined with the appropriate interstage bandpass fi lter, this LNA can be used as a receiver pre-amplifi er in various applications from 1.2 to 3.0 GHz. Evaluation boards are available with or without a GPS L1 (1575 MHz) band pass fi lter.