Features: Noise Figure: 2.8 dBGain: 15 dBOIP3: 23 dBmSingle Supply: +3V @ 65 mA50 Ohm Matched Input/OutputApplicationThe HMC519 is ideal for use as either a LNA or driver amplifi er for:• Point-to-Point Radios• Point-to-Multi-Point Radios & VSAT• Test Equipment & Sensors&...
HMC519: Features: Noise Figure: 2.8 dBGain: 15 dBOIP3: 23 dBmSingle Supply: +3V @ 65 mA50 Ohm Matched Input/OutputApplicationThe HMC519 is ideal for use as either a LNA or driver amplifi er for:• Poin...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·360° of Continuous Phase Control·40 dB of Continuous Gain Control·-162 dBm/Hz Output No...
Drain Bias Voltage (Vdd1, Vdd2, Vdd3) | +5.5 Vdc |
RF Input Power (RFin)(Vdd = +3.0 Vdc) | +8 dBm |
Channel Temperature | 175 |
Continuous Pdiss (Ta = 85 ) (derate 3.95 mW/ above 85 ) |
2.65 W |
Thermal Resistance (RTH) (junction to package base) |
34/W |
Storage Temperature | -65 to +150 |
Operating Temperature | -55 to +85 |
ESD Sensitivity (HBM) | Class 1A |
The HMC519 chip is a high dynamic range GaAs PHEMT MMIC Low Noise Amplifi er (LNA) which covers the 18 to 32 GHz frequency range. The HMC519 provides 15 dB of small signal gain, 2.8 dB of noise fi gure and has an output IP3 greater than 23 dBm. The chip can easily be integrated into hybrid or MCM assemblies due to its small size. All data is tested with the chip in a 50 Ohm test fi xture connected via 0.075 mm (3 mil) ribbon bonds of minimal length 0.31 mm (12 mil). Two 0.025 mm (1 mil) diameter bondwires may also be used to make the RFIN and RFOUT connections