Features: Noise Figure: 2 dB+26 dBm P1dBGain: 27 dB+35 dBm Output IP3+5V Supply50 Ohm Matched Input/OutputApplicationThe HMC490 is ideal for use as either a LNA or driver amplifi er for:• Point-to-Point Radios• Point-to-Multi-Point Radios• VSAT• Military & SpaceSpecific...
HMC490: Features: Noise Figure: 2 dB+26 dBm P1dBGain: 27 dB+35 dBm Output IP3+5V Supply50 Ohm Matched Input/OutputApplicationThe HMC490 is ideal for use as either a LNA or driver amplifi er for:• Poin...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe HMC400MS8(E) is a high dynamic range passive MMIC mixer in plastic surface mount 8 ...
Features: Pout: -7 dBmPhase Noise: -105 dBc/Hz @100 KHz Typ.No External Resonator NeededSingle Sup...
Drain Bias Voltage (Vdd1, Vdd2, Vdd3) | +5.5 Vdc |
Gate Bias Voltage (Vgg1, Vgg2, Vgg3) | -4.0 to 0 Vdc |
RF Input Power (RFin)(Vdd = +5.0 Vdc) | +10 dBm |
Continuous Pdiss (T= 85 ) (derate 29 mW/°C above 85 ) |
2.65 W |
Channel Temperature | 175 |
Thermal Resistance (channel to die bottom) |
134 /W |
Storage Temperature | -65 to +150 |
Operating Temperature | -55 to +85 |
The HMC490 is a high dynamic range GaAs PHEMT MMIC Low Noise Amplifi er which operates between 12 and 17 GHz. The HMC490 provides 27 dB of gain, 2 dB noise fi gure and an output IP3 of 35 dBm from a +5.0 V supply voltage. The amplifi er chip can easily be integrated into Multi-Chip-Modules (MCMs) due to its small size. All data is tested with the chip in a 50 Ohm test fi xture connected via 0.025mm (1 mil) diameter wire bonds of minimal length 0.31mm (12 mils).