Features: Noise Figure: 2.5 dB @ 10 GHzGain: 14 dB @ 10 GHzP1dB Output Power: +16 dBm @ 10 GHzSupply Voltage: +8.0V @ 60 mA50 Ohm Matched Input/Output3.12 mm x 1.63 mm x 0.1 mmApplicationThe HMC460 is ideal for:• Telecom Infrastructure• Microwave Radio & VSAT• Military & ...
HMC460: Features: Noise Figure: 2.5 dB @ 10 GHzGain: 14 dB @ 10 GHzP1dB Output Power: +16 dBm @ 10 GHzSupply Voltage: +8.0V @ 60 mA50 Ohm Matched Input/Output3.12 mm x 1.63 mm x 0.1 mmApplicationThe HMC460 ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe HMC400MS8(E) is a high dynamic range passive MMIC mixer in plastic surface mount 8 ...
Features: Pout: -7 dBmPhase Noise: -105 dBc/Hz @100 KHz Typ.No External Resonator NeededSingle Sup...
Drain Bias Voltage (Vdd) | +9.0 Vdc |
Gate Bias Voltage (Vgg1) | -2.0 to 0 Vdc |
RF Input Power (RFin)(Vdd = +8.0 Vdc) | +23 dBm |
Channel Temperature | 175 °C |
Continuous Pdiss (T = 85 °C) (derate 24 mW/°C above 85 °C) |
2.17 W |
Thermal Resistance (channel to die bottom) |
41.5 °C/W |
Storage Temperature | -65 to +150 °C |
Operating Temperature | -40 to +85 °C |
The HMC460 is a GaAs MMIC PHEMT Low Noise Distributed Amplifi er die which operates between DC and 20 GHz. The amplifi er provides 14 dB of gain, 2.5 dB noise fi gure and +16 dBm of output power at 1 dB gain compression while requiring only 60 mA from a +8V supply. The HMC460 amplifi er can easily be integrated into Multi-Chip- Modules (MCMs) due to its small size. All data is with the chip in a 50 Ohm test fi xture connected via 0.025mm (1 mil) diameter wire bonds of minimal length 0.31mm (12 mils).