HFBR-5105

Features:

• Full Compliance with the Optical Performance Requirements of the FDDI PMD Standard
• Full Compliance with the FDDI LCF-PMD Standard
• Full Compliance with the Optical Performance Requirements of the ATM 100 Mbps Physical Layer
• Full Compliance with the Optical Performance Requirements of 100 Base-FX Version of IEEE 802.3u
• Very Low Cost 800 nm Alternative with FDDI and ATM Compliant Signaling
• Multisourced 1x9 Package Style with Choice of Duplex SC or Duplex ST* Receptacle
• Wave Solder and Aqueous Wash Process Compatible
• Manufactured in an ISO 9002 Certified Facility


Application

• Multimode Fiber Backbone Links
• Multimode Fiber Wiring Closet to Desktop Links
• Very Low Cost Multimode Fiber 800 nm Links from Wiring Closet to Desktop


Pinout




Specifications

Parameter	Symbol	Min.	Typ.	Max.	Unit	Reference
Storage Temperature	TS	-40		100	°C
Lead Soldering Temperature	TSOLD			260	°C
Lead Soldering Time	tSOLD			10	sec.
Supply Voltage	VCC	-0.5		7.0	V
Data Input Voltage	VI	-0.5		VCC	V
Differential Input Voltage	VD			1.4	V	Note 1
Output Current	IO			50	mA

Description

The HFBR-5100 family of transceivers from Hewlett-Packard provide the system designer with products to implement a range of FDDI and ATM (Asynchronous Transfer Mode) designs at the 100 Mbps/125 MBd rate.

The HFBR-5100 family of  transceivers are all supplied in the new industry standard 1x9 SIP package style with either a duplex SC or a duplex ST* connector interface.