Features: • Part Identification HDD32M72D9RPW 10A : 100MHz (CL=2) HDD32M72D9RPW 13A : 133MHz (CL=2) HDD32M72D9RPW 13B : 133MHz (CL=2.5)• 2.5V ± 0.2V VDD and VDDQ power supply• Double-data-rate architecture; two data transfers per clock cycle• Bidirectional data strobe(DQ...
HDD32M72D9RPW: Features: • Part Identification HDD32M72D9RPW 10A : 100MHz (CL=2) HDD32M72D9RPW 13A : 133MHz (CL=2) HDD32M72D9RPW 13B : 133MHz (CL=2.5)• 2.5V ± 0.2V VDD and VDDQ power supply• D...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Part IdentificationHDD32M64B8 10A : 100MHz (CL=2)HDD32M64B8 13A : 133MHz (CL=2...
PARAMETER | SYMBOL | RATING | UNTE |
Voltage on any pin relative to Vss | VIN, VOUT | -0.5 ~ 3.6 | V |
Voltage on VDD supply relative to Vss | VDD | -1.0 ~ 3.6 | V |
Voltage on VDDQ supply relative to Vss | VDDQ | -1.0 ~ 3.6 | V |
Storage temperature | TSTG | -55 ~ +150 | °C |
Power dissipation | PD | 13.5 | W |
Short circuit current | IOS | 50 | mA |
The HDD32M72D9RPW is a 32M x 72 bit Double Data Rate(DDR) Synchronous Dynamic RAM high-density memory module. The HDD32M72D9RPW module consists of nine CMOS 32M x 8 bit with 4banks DDR SDRAMs in 66pin TSOP-II 400mil packages and 2K EEPROM in 8-pin TSSOP package on a 184-pin glass-epoxy. Four 0.1uF decoupling capacitors are mounted on the printed circuit board in parallel for each DDR SDRAM. The HDD32M72D9RPW is a DIMM(Dual in line Memory Module) .Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operating frequencies, programmable latencies and burst lengths allows the same device to be useful for a variety of high bandwidth, high performance memory sy stem applications. All module components may be powered from a single 2.5V DC power supply and all inputs and outputs are SSTL_2 compatible.