Features: SpecificationsDescriptionThe Intersil HCTS138KMSR is a Radiation Hardened 3-to-8 line Decoder/Demultiplexer.The outputs are active in the low state.Two active low and one active high enables (E1,E2,E3) are provided.If the device is enabled, the binary inputs(A0,A1,A2) determine which one...
HCTS138KMSR: Features: SpecificationsDescriptionThe Intersil HCTS138KMSR is a Radiation Hardened 3-to-8 line Decoder/Demultiplexer.The outputs are active in the low state.Two active low and one active high enabl...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The Intersil HCTS138KMSR is a Radiation Hardened 3-to-8 line Decoder/Demultiplexer.The outputs are active in the low state.Two active low and one active high enables (E1,E2,E3) are provided.If the device is enabled, the binary inputs(A0,A1,A2) determine which one of the eight normally high outputs will go to a low logic level.The HCTS138KMSR utilizes advanced CMOS/SOS technology to achieve high-speed operation.This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family.It is supplied in a 16 lead Ceramic flatpack (K suffix) or a SBDIP Package (D suffix).
Features of the HCTS138KMSR are:(1)significant power reduction compared to LSTTL ICs;(2)military temperature range:-55 to +125;(3)latch-up free under any conditions;(4)3 micron radiation hardened SOS CMOS;(5)total dose 200K RAD (Si);(6)input current levels Ii 5A at VOL, VOH;(7)LSTTL input compatibility:VIL=0.8V Max;(8)DC operating voltage range:4.5V to 5.5V.
The absolute maximum ratings of the HCTS138KMSR can be summarized as:(1)supply voltage (VCC):-0.5V to +7.0V;(2)input voltage range,all inputs:-0.5V to VCC +0.5V;(3)DC input current,any one input:±10mA;(4)DC drain current,any one output:±25mA;(5)storage temperature range (TSTG):-65 to +150;(6)lead temperature (soldering 10sec):+265;(7)junction temperature(TJ):+175.CAUTION: As with all semiconductors, stress listed under "Absolute Maximum Ratings" may be applied to devices (one at a time) without resulting in permanent damage.This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. The conditions listed under 'Electrical Performance Characteristics' are the only conditions recommended for satisfactory device operation..