Features: ` Low ON resistance:160 W (typ.) at VCC = 4.5 V120 W (typ.) at VCC = 6.0 V80 W (typ.) at VCC = 9.0 V` Individual switch controls` Typical break before make built in` Output capability: non-standard` ICC category: SSIPinoutSpecifications Symbol PARAMETER MIN. MAX. ...
HCT4016: Features: ` Low ON resistance:160 W (typ.) at VCC = 4.5 V120 W (typ.) at VCC = 6.0 V80 W (typ.) at VCC = 9.0 V` Individual switch controls` Typical break before make built in` Output capability:...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
PARAMETER |
MIN. |
MAX. |
UNIT |
CONDITIONS |
VCC |
DC supply voltage |
-0.5 |
+11.0 |
V |
|
±IIK |
DC digital input diode current |
20 |
mA |
for VI < -0.5 V or VI > VCC + 0.5 V | |
±ISK |
DC switch diode current |
20 |
mA |
for VS < -0.5 V or VS > VCC + 0.5 V | |
±IS |
DC switch current |
25 |
mA |
for -0.5 V < VS < VCC + 0.5 V | |
±ICC; ±IGND |
DC VCC or GND current |
50 |
mA |
||
Tstg |
storage temperature range |
-65 |
+150 |
°C |
|
Ptot |
power dissipation per package plastic DIL |
750 |
mW |
for temperature range: -40 to +125 °C 74HC/HCT above +70 °C: derate linearly with 12 mW/K | |
plastic mini-pack (SO) |
500 |
mW |
above +70 °C: derate linearly with 8 mW/K | ||
PS |
power dissipation per switch |
100 |
mW |
The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the "4016" of the"4000B" series. They are specified in compliance with JEDEC standard no. 7A.
The 74HC/HCT4016 have four independent analog switches (transmission gates). Each switch has two input/output terminals (Yn, Zn) and an active HIGH enable input (En). When En is connected to VCC, a low bidirectional path between Yn and Zn is established (ON condition). When En is connected to ground (GND), the switch is disabled and a high impedance between Yn and Zn is established (OFF condition).
Current through a switch will not cause additional VCC current provided the voltage at the terminals of the 74HC/HCT4016 switch is maintained within the supply voltage range; VCC >> (VY, VZ) >> GND. Inputs Yn and Zn are electrically equivalent terminals.