HCPL0661

Series: -
Voltage - Isolation: 3750Vrms
Input Type: DC
Output Type: Open Collector
Mounting Type: Surface Mount
Propagation Delay High - Low @ If: -
Package / Case: 8-SOIC (0.154", 3.90mm Width)
Current - Output / Channel: 50mA
Packaging: Tube
Number of Channels: 2, Unidirectional
Current - DC Forward (If): 15mA
Data Rate: 10Mbps
Supplier Device Package: 8-SO
Manufacturer: Fairchild Optoelectronics Group


Features:

` Compact SO8 package
` Very high speed-10 MBit/s
` Superior CMR
` Fan-out of 8 over -40 to +85
` Logic gate output
` Strobable output (single channel devices)
` Wired OR-open collector
` U.L. recognized (File # E90700)
` VDE approval pending

Application

· Ground loop elimination
· LSTTL to TTL, LSTTL or 5-volt CMOS
· Line receiver, data transmission
· Data multiplexing
· Switching power supplies
· Pulse transformer replacement
· Computer-peripheral interface

Specifications

Parameter		Symbol	Value	Units
Storage Temperature		TSTG	-40 to +125
Operating Temperature		TOPR	-40 to +85
EMITTER DC/Average Forward Input Current (each channel)	Single Channel	IF	50	mA
	Dual Channel
Enable Input Voltage Not to exceed VCC by more than 500 mV	Single Channel	VE	5.5	V
Reverse Input Voltage (each channel)		VR	5.0	V
Power Dissipation	Single Channel	PI	45	mW
	Dual Channel
DETECTOR Supply Voltage		VCC (1minute max)	7.0	V
Output Current (each channel)		IO	50	mA
Output Voltage (each channel)		VO	7.0	V
Collector Output Power Dissipation	Single Channel	PO	85	mW
	Dual Channel

Description

The HCPL06XX optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output (single channel devices). The HCPL06XX  devices are housed in a compact small-outline package. This output features an open collector, thereby permitting wired OR outputs. The HCPL0600 and HCPL0601 output consists of bipolar transistors on a bipolar process while the HCPL0611, HCPL0630 and HCPL0631 output consists of bipolar transistors on a CMOS process for reduced power consumption. The coupled parameters are guaranteed over the temperature range of - 40 to +85. A maximum input signal of 5 mA will provide a minimum output sink current of 13 mA (fan out of 8). An internal noise shield provides superior common mode rejection.