HCPL-M700

Maximum Reverse Diode Voltage : 5 V
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Forward Diode Voltage : 1.7 V
Maximum Input Diode Current : 20 mA
Maximum Power Dissipation : 100 mW
Package / Case : SOIC-5
Maximum Operating Temperature : + 85 C
Maximum Baud Rate : 100 KBps
Current Transfer Ratio : 2600 %


Features:

• Surface Mountable
• Very Small, Low Profile JEDEC Registered Package Outline
• Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes
• High Current Transfer Ratio - 2000%
• Low Input Current Capability - 0.5 mA
• TTL Compatible Output - V_OL = 0.1 V
• Guaranteed ac and dc Performance Over Temperature: 0°C to 70°C
• High Output Current - 60 mA
• Recognized under the Component Program of U.L. (File No. E55361) for Dielectric Withstand Proof Test Voltage of 3750 Vac, 1 Minute
• Lead Free Option "-000E"




Application

• Ground Isolate Most Logic Families - TTL/TTL, CMOS/ TTL, CMOS/CMOS, LSTTL/ TTL, CMOS/LSTTL
• Low Input Current Line Receiver
• EIA RS232C Line Receiver
• Telephone Ring Detector
• ac Line Voltage Status Indicator - Low Input Power Dissipation
• Low Power Systems - Ground Isolation




Specifications

(No Derating Required up to 85°C)
Storage Temperature .......................................... -55°C to +125°C
Operating Temperature ......................................... -40°C to +85°C
Average Input Current - I_F ...................................................... 20 mA
Peak Input Current - I_F ............................................................40 mA
(50% duty cycle, 1 ms pulse width)
Peak Transient Input Current - I_F ............................................ 1.0 A
(1 µs pulse width, 300 pps)
Reverse Input Voltage - V_R ......................................................... 5 V
Input Power Dissipation ........................................................ 35 mW
Output Current - IO (Pin 5) .................................................... 60 mA
Supply and Output Voltage - V_CC (Pin 6-4),V_O (Pin 5-4)
HCPL-M700................................................................. -0.5 V to 7 V
HCPL-M701............................................................... -0.5 V to 18 V
Output Power Dissipation ................................................... 100 mW
Infrared and Vapor Phase Reflow Temperature .............. see below




Description

These HCPL-M700 small outline, low input current, high gain optocouplers are single channel devices in a five lead miniature footprint. HCPL-M700 are electrically equivalent to the following Agilent optocouplers:The SO-5 JEDEC registered (MO- 155) package outline does not require "through holes" in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes. These high gain series optocouplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage results in TTL compatible saturation voltages and high speed operation. Where desired the V_CC and V_O terminals may be tied together to achieve conventional photodarlington operation.

Parameters:

Technical/Catalog Information	HCPL-M700
Vendor	Avago Technologies US Inc.
Category	Isolators
Isolation Voltage	2500Vrms
Input Type	DC
Output Type	Darlington with Vcc
Current - Output/Channel	60mA
Voltage - Output	18V
Vce Saturation (Max)	-
Current Transfer Ratio (Min)	400% @ 500A
Mounting Type	Surface Mount
Package / Case	5-SOIC
Packaging	Tube
Number of Circuits	1 - Single
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL M700 HCPLM700