HCPL-M453

Maximum Reverse Diode Voltage : 5 V
Packaging : Tube
Maximum Input Diode Current : 25 mA
Maximum Forward Diode Voltage : 1.7 V
Maximum Power Dissipation : 100 mW
Package / Case : SOIC-5
Maximum Operating Temperature : + 70 C
Minimum Operating Temperature : 0 C
Maximum Baud Rate : 1 Mbps
Current Transfer Ratio : 50 %


Description

This small outline high CMR, high speed, diode-transistor optocoupler is a single channel device in a five lead miniature footprint. HCPL-M453's SO-5 JEDEC registered (MO-155) package outline does not require "through holes" in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes.

HCPL-M453 uses an insulating layer between the light emitting diode and an integrated photon detector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times over that of a conventional photo-transistor coupler by reducing the base-collector capacitance.

The HCPL-M453 is an HCPL-M452 with increased common mode transient immunity at 15000 V/ms minimum at VCM = 1500 V guaranteed.

Parameters:

Technical/Catalog Information	HCPL-M453
Vendor	Avago Technologies US Inc.
Category	Isolators
Isolation Voltage	3750Vrms
Input Type	DC
Output Type	Transistor with Vcc
Current - Output/Channel	8mA
Voltage - Output	20V
Vce Saturation (Max)	-
Current Transfer Ratio (Min)	19% @ 16mA
Mounting Type	Surface Mount
Package / Case	5-SOIC
Packaging	Tube
Number of Circuits	1 - Single
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL M453 HCPLM453