Maximum Operating Temperature
: + 100 C
Packaging
: Tube
Maximum Input Diode Current
: 25 mA
Maximum Power Dissipation
: 100 mW
Minimum Operating Temperature
: - 55 C
Maximum Reverse Diode Voltage
: 3 V
Maximum Baud Rate
: 1 Mbps
Maximum Forward Diode Voltage
: 1.85 V
Package / Case
: PDIP-8
Current Transfer Ratio
: 65 %
DescriptionHCPL-4504 contains an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector.
The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504 series an excellent solution to IPM inverter dead time and other switching problems.The CTR, propagation delay, and CMR are specified both for TTL and IPM conditions which are provided for ease of application. This single channel, diode-transistor optocoupler is available in a 8-Pin DIP package. An insulating layer between a LED and an integrated photodetector provides electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base collector capacitance.
Parameters: | Technical/Catalog Information | HCPL-J454 |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Isolation Voltage | 3750Vrms |
| Input Type | DC |
| Output Type | Transistor with Vcc |
| Current - Output/Channel | 8mA |
| Voltage - Output | 20V |
| Vce Saturation (Max) | - |
| Current Transfer Ratio (Min) | 19% @ 16mA |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Packaging | Tube |
| Number of Circuits | 1 - Single |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCPL J454
HCPLJ454
|
HCPL-J454 Data Sheet
