HCPL-5631

Current Transfer Ratio :
Maximum Input Diode Current :
Packaging :
Maximum Reverse Diode Voltage : 5 V
Maximum Forward Diode Voltage : 1.9 V
Minimum Operating Temperature : - 55 C
Maximum Baud Rate : 10 MBps
Maximum Operating Temperature : + 125 C
Package / Case : PDIP-8
Maximum Power Dissipation : 200 mW


Description

The HCPL-5631 is a high reliability Class H two channel hermetically sealed optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also available. See the datasheet for details.
The HCPL-5631 is capable of operation and storage over the full military temperature range and may also be purchased as either commercial grade or with full MIL-PRF-38534 Class Level K testing or from the appropriate DSCC Drawing(81028 for the Class H, 5962-98001 for the Class K). All devices are manufactured and tested on a MIL-PRF-38534 certified line and the Class H and K versions are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits. Quad channel devices are available by special order in the 16-Pin DIP through-hole packages.
Each HCPL-5631 channel contains a GaAsP light emitting diode which is optically coupled to an integrated high speed photon detector. The output of the detector is an open collector Schottky clamped transistor. Internal shields provide a guaranteed common mode transient immunity specification of 1000 V/micro-second. For Isolation Voltage applications requiring up to 2500 Vdc, the HCPL-5650 family is also available. Package styles for this die set in one, two, or four channels are 8 and 16-Pin DIP through hole, 16-Pin surface mount DIP flat pack, and 20 pad Leadless Ceramic Chip Carrier. Most devices may be purchased with a variety of lead forms and plating options. See the datasheet for details.
Because the same electrical die (emitters and detectors) are used for each channel of each HCPL-5631 device listed in the datasheet, absolute maximum ratings, recommended operating conditions, electrical specifications, and performance characteristics shown in the datasheet figures are virtually identical for all parts. Occasional exceptions exist due to package variations and limitations and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities give justification for the use of data obtained from one part to represent other parts performance for reliability and certain limited radiation test results.

The HCPL-5631 is a hermetically sealed,high speed,high CMR,logic gate optocouplers.

Features of the HCPL-5631 are:(1)dual marked with device part number and DSCC drawing number; (2)manufactured and tested on a MIL-PRF-38534 certified line; (3)QML-38534,class H and K; (4)five hermetically seaked package configurations ; (5)performance guaranteed over -55~125; (6)high speed :10M bit/s; (7)CMR:>10,000V/s typical; (8)1500Vdc withstand test voltage; (9)high radiation immunity; (10)reliability data ; (11)TTL circuit compatibility.

The absolute maximum ratings of the HCPL-5631 can be summarized as:(1)storage temperature range:-65~150; (2)operating temperature:-55~125; (3)case temperature:170; (4)junction temperature:175; (5)lead solder temperature:260 for 10s; (6)input power dissipation:35mW; (7)reverse input voltage:5V; (8)supply voltage:7V; (9)output current:25mA; (10)output power dissipation:40mW; (11)output voltage:7V; (12)package power dissipation:200mW.If you want to know more information such as the electrical characteristics, please download the datasheet in www.seekic.com or www.chinaicmart.com.