HCPL-5300

Isolation Voltage :
Packaging :
Maximum Power Dissipation : 145 mW
Maximum Operating Temperature : + 125 C
Maximum Forward Diode Voltage : 1.8 V
Maximum Reverse Diode Voltage : 5 V
Output Type : Open Collector
Package / Case : DIP-8
Maximum Forward Diode Current : 20 mA
Maximum Continuous Output Current : 15 mA
Minimum Operating Temperature : - 55 C
Maximum Propagation Delay Time : 750 ns


Features:

Performance Specified Over Full Military Temperature Range: -55°C to +125°C
Fast Maximum Propagation Delays
t_PHL = 450ns,
t_PLH = 650ns
Minimized Pulse Width Distortion (PWD = 450 ns)
High Common Mode Rejection (CMR): 10kV/s at V_CM= 1000V
CTR> 30% at I_F = 10 mA
1500 Vdc Withstand Test Voltage
Manufactured and Tested on a MIL-PRF-38534 Certified Line
Hermetically Sealed Packages
Dual Marked with Device Part Number and DSCC Drawing Number
QML-38534, Class H and K
HCPL-4506 Function Compatibility




Application

• Military and Space
• High Reliability Systems
• Harsh Industrial Environments
• Transportation, Medical, and Life Critical Systems
• IPM Isolation
• Isolated IGBT/MOSFET Gate Drive
• AC and Brushless DC Motor Drives
• Industrial Inverters




Specifications

Storage Temperature (T_S).............................................................................................................-65 to 150°C
Operating Temperature (T_A).........................................................................................................-55 to 125°C
Junction Temperature (T_J)........................................................................................................................175°C
Average Input Current (I_F(AVG))...............................................................................................................25 mA
Peak Input Current (50% duty cycle, 1 ms pulse width) (I_F(PEAK))........................................................50 mA
Peak Transient Input Current (<1 µs pulse width, 300 pps) (I_F(TRAN)).....................................................1.0 A
Reverse Input Voltage (Pin 3-2) (V_R)............................................................................................................5 V
Average Output Current (Pin 6) (I_O(AVG))................................................................................................15 mA
Resistor Voltage (Pin 7) (V₇).........................................................................................................-0.5 V to VCC
Output Voltage (Pin 6-5) (V_O)..........................................................................................................-0.5 to 30 V
Supply Voltage (Pin 8-5) (V_CC).........................................................................................................-0.5 to 30 V
Output Power Dissipation (P_O)..............................................................................................................100 mW
Total Power Dissipation (P_T)..................................................................................................................145 mW
Lead Solder Temperature (soldering, 10 seconds)..................................................................................260°C




Description

The HCPL-530X devices consist of a GaAsP LED optically coupled to an integrated high gain photo detector in a hermetically sealed package. The HCPL-530X devices are capable of operation and storage over the full military temperature ange and can be purchased as either standard product or with full MIL-PRF-38534 Class Level H or K testing or from the DSCC Drawing 5962-96852. All devices are manufactured and tested on a MIL-PRF-38534 certified line and are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Micro-circuits. Minimized propagation delay difference between devices make these optocouplers excellent solutions for improving inverter efficiency through reduced switching dead time. An on chip 20 kΩoutput pull-up resistor can be enabled by shorting output pins 6 and 7, thus eliminating the need for an external pull-up resistor in common IPM applica- tions. Specifications and performance plots are given for typical IPM applications.

The HCPL-530X devices is a commercial grade hermetically sealed optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also available. See the datasheet for details.
The product is capable of operation and storage over the full military temperature range and may also be purchased with full MIL-PRF-38534 Class H or K level testing or from the DSCC Standard Microcircuit Drawing (SMD) 5962-96852. The HCPL-5300 is manufactured and tested on a MIL-PRF-38534 certified line and Class H and K versions are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits.
The HCPL-530X devices device consists of a GaAsP LED optically coupled to an integrated high gain photodetector. Minimized propagation delay difference between devices make these optocouplers excellent solutions for improving inverter efficiency through reduced switching dead time. An on chip 20 kohm output pull-up resistor can be enabled by shorting pins 6 and 7, thus eliminating the need for an external pull-up resistor in common IPM applications. Specifications and performance plots are contained in the datasheet for typical IPM applications.

Parameters:

Technical/Catalog Information	HCPL-5300
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP
Isolation Voltage	1500VDC
Configuration	1, One Direction
Input Type	DC
Output Type	Open Collector
Data Rate	-
Current - Output/Channel	15mA
Packaging	Tube
Lead Free Status	Lead Free Compliant by Exemption
RoHS Status	RoHS Compliant by Exemption
Other Names	HCPL 5300 HCPL5300