HCPL-5151

Isolation Voltage :
Maximum Continuous Output Current :
Packaging :
Maximum Operating Temperature : + 125 C
Maximum Propagation Delay Time : 500 ns
Maximum Forward Diode Voltage : 1.8 V
Maximum Reverse Diode Voltage : 5 V
Output Type : Open Collector
Maximum Power Dissipation : 295 mW
Package / Case : DIP-8
Minimum Operating Temperature : - 55 C
Maximum Forward Diode Current : 18 mA


Features:

• Performance Guaranteed over Full Military Temperature Range: -55 to +125

• Manufactured and Tested on a MILPRF-38534 Certified Line
• Hermetically Sealed Packages
• Dual Marked with Device Part Number and DSCC Drawing Number
• QML-38534
• HCPL-3150 Function Compatibility
• 0.5 A Minimum Peak Output Current
• 10 kV/s Minimum Common Mode Rejection (CMR) at V_CM = 1000 V
• 1.0 V Maximum Low Level Output Voltage (V_OL) Eliminates Need for Negative Gate Drive
• I_CC= 5 mA Maximum Supply Current
• Under Voltage Lock-Out Protection (UVLO) with Hysteresis
• Wide Operating V_CCRange: 15 to 30 Volts
• 500 ns Maximum Propagation Delay
• +/- 0.35 s Maximum Delay Between Devices

Application

• Industrial and Military Environments
• High Reliability Systems
• Harsh Industrial Environments
• Transportation, Medical, and Life Critical Systems
• Isolated IGBT/MOSFET Gate Drive
• AC and Brushless DC Motor Drives
• Industrial Inverters
• Switch Mode Power Supplies (SMPS)
• Uninterruptible Power Supplies (UPS)

Specifications

Parameter	Symbol	Min.	Max.	Units	Note
Storage Temperature	TS	-65	+150	C °
Operating Temperature	TA	-55	+125	C °
Case Temperature	TC		+145	C °
Junction Temperature	TJ		+150	C °
Lead Solder Temperature			260 for 10s	C °
Average Input Current	I F AVG		25	mA	1
Peak Transient Input Current (<1 s pulse width, 300 pps)	I F PK		1.0	A
Reverse Input Voltage	VR		5	V
"High" Peak Output Current	IOH (PEAK)		0.6	A	2
"Low" Peak Output Current	IOL (PEAK)		0.6	A	2
Supply Voltage	(V CC-VEE )	0	35	V
Output Voltage	V O (PEAK)	0	VCC	V
Input Power Dissipation	PE		4	mW	1
Output Power Dissipation	PO		250	mW	3
Total Power Dissipation	PT		295	mW	4

Description

The HCPL-5151 is a high reliability Class H hermetically sealed optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also available. See the datasheet for details.
The product is capable of operation and storage over the full military temperature range and may also be purchased in a commercial grade or from the DSCC Standard Microcircuit Drawing (SMD) 5962-04205. The HCPL-5151 is manufactured and tested on a MIL-PRF-38534 certified line and is included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits.
The device consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 1200V/50A. For IGBTs with higher ratings, the HCPL-5151 can be used to drive a discrete power stage, which drives the IGBT gate.

The HCPL-5151 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 1200 V/50 A. For IGBTs with higher ratings, the HCPL- 5150 can be used to drive a discrete power stage, which drives the IGBT gate.
The HCPL-5151 products are capable of operation and storage over the full military temperature range and can be purchased as either commercial product, with full MIL- PRF- 38534 Class H testing, or from Defense Supply Center Columbus (DSCC) Standard Microcircuit Drawing (SMD) 5962- 04205. All devices are manufactured and tested on aMIL-PRF- 38534 certified line and are included in the DSCC Qualified Manufacturers List, QML- 38534 for Hybrid Microcircuits.