Maximum Forward Diode Voltage
: 1.8 V
Maximum Reverse Diode Voltage
: 5 V
Maximum Power Dissipation
: 45 mW
Maximum Operating Temperature
: + 100 C
Packaging
: Tube
Maximum Input Diode Current
: 25 mA
Minimum Operating Temperature
: - 55 C
Maximum Baud Rate
: 1 Mbps
Package / Case
: PDIP-8
Current Transfer Ratio
: 24 %
Features: • 15 kV/ms Minimum Common Mode Transient Immunity at VCM = 1500 V (HCPL-4534/0534)
• High Speed: 1 Mb/s
• TTL Compatible
• Available in 8 Pin DIP, SO-8, and 8 Pin DIP Gull Wing Surface Mount (Option 020) Packages
• High Density Packaging
• 3 MHz Bandwidth
• Open Collector Outputs
• Guaranteed Performance from 0 to 70
• Safety Approval UL Recognized 2500 V rms for 1 minute (5000 V rms for 1 minute for Option 020) per UL1577 CSA Approved
• Single Channel Version Available (4502/3, 0452/3)
• MIL-STD-1772 Version Available (55XX/65XX/4N55)
Application• Line Receivers High Common Mode Transient Immunity (>1000 V/ms) and Low Input-Output Capacitance (0.6 pF)
• High Speed Logic Ground Isolation
TTL/TTL, TTL/ LTTL, TTL/CMOS, TTL/LSTTL
• Replace Pulse Transformers
Save Board Space and Weight
• Analog Signal Ground Isolation
Integrated Photon Detector Provides Improved Linearity over Phototransistor Type
• Polarity Sensing
• Isolated Analog Amplifier
Dual Channel Packaging Enhances Thermal Tracking
Specifications
|
Parameter |
Symbol |
Device |
Min. |
Max. |
Units |
Note |
| Storage Temperature |
TS |
|
55 |
125 |
|
|
| Operating Temperature† |
TA |
|
- 55 |
100 |
|
|
Average Forward Input Current
(each channel) |
IF(AVG) |
|
|
25 |
mA |
|
Peak Forward Input Current (each channel)
(50% duty cycle, 1 ms pulse width) |
IF(PEAK) |
|
|
50 |
mA |
|
Peak Transient Input Current (each channel)
(£1 ms pulse width, 300 pps) |
IF(TRANS) |
|
|
5 |
A |
|
| Reverse LED Input Voltage (each channel) |
VR |
|
|
1 |
V |
|
| Input Power Dissipation (each channel) |
PIN |
|
|
45 |
mW |
|
| Average Output Current (each channel) |
IO(AVG) |
8 |
mA |
| Peak Output Current |
IO(PEAK) |
|
|
16 |
mA |
|
| Supply Voltage (Pin 8-5) |
VCC |
|
-0.5 |
30 |
V |
|
| Output Voltage (Pins 7-5, 6-5) |
VO |
|
-0.5 |
20 |
V |
|
| Output Power Dissipation (each channel) |
PO |
|
|
35 |
mW |
13 |
Lead Solder Temperature
(Through-Hole Parts Only)
1.6 mm below seating plane, 10 seconds |
TLS |
8-Pin DIP |
|
260 |
|
|
| Reflow Temperature Profile |
TRP |
SO-8 and
Option 300 |
See Package Outline Drawings
section |
|
DescriptionThese HCPL-4534 dual channel optocouplers contain a pair of light emitting diodes and integrated photodetectors with electrical insulation between input and output.
Separate connection for the HCPL-4534 photodiode bias and outputtransistor collectors increase thespeed up to a hundred times that ofa conventional phototransistor coupler by reducing the basecollector capacitance.
Parameters: | Technical/Catalog Information | HCPL-4534 |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Isolation Voltage | 3750Vrms |
| Input Type | DC |
| Output Type | Transistor with Vcc |
| Current - Output/Channel | 8mA |
| Voltage - Output | 20V |
| Vce Saturation (Max) | - |
| Current Transfer Ratio (Min) | 15% @ 16mA |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Packaging | Tube |
| Number of Circuits | 2 - Dual |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCPL 4534
HCPL4534
|
HCPL-4534 Data Sheet
