Maximum Continuous Output Current
:
Minimum Operating Temperature
: - 40 C
Packaging
: Tube
Isolation Voltage
: 3750 Vrms
Package / Case
: SO-16
Maximum Propagation Delay Time
: 500 ns
Maximum Reverse Diode Voltage
: 5 V
Maximum Forward Diode Current
: 16 mA
Maximum Operating Temperature
: + 100 C
Output Type
: Open Collector
Maximum Power Dissipation
: 295 mW
Maximum Forward Diode Voltage
: 1.95 V
Features: • 0.5 A Minimum Peak Output Current
• 15 kV/s Minimum Common
Mode Rejection (CMR) at VCM = 1500 V
• 1.0 V Maximum Low Level
Output Voltage (VOL) Eliminates Need for Negative Gate Drive
• ICC = 5 mA Maximum Supply Current
• Under Voltage Lock-Out Protection (UVLO) with Hysteresis
• Wide Operating VCC Range: 15 to 30 Volts
• 0.5 s Maximum Propagation Delay
• +/ 0.35 s Maximum Delay Between Devices/Channels
• Industrial Temperature Range: -40 to 100
• HCPL-315J: Channel One to Channel Two Output Isolation = 1500 Vrms/1 min.
• Safety and Regulatory Approval: UL Recognized (UL1577) 3750 Vrms/1 min.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
IEC/EN/DIN EN 60747-5-2 Approved
VIORM = 630 Vpeak (HCPL-3150 Option 060 only)
VIORM = 891 Vpeak (HCPL-315J) CSA Certified
Application• Isolated IGBT/MOSFET Gate Drive
• AC and Brushless DC Motor Drives
• Industrial Inverters
• Switch Mode Power Supplies (SMPS)
• Uninterruptable Power Supplies (UPS)
Specifications
|
Parameter |
Symbol |
Min. |
Max. |
Units |
Note |
| Storage Temperature |
TS |
-55 |
125 |
|
|
| Operating Temperature |
TA |
-40 |
100 |
|
|
| Average Input Current |
IF(AVG) |
|
25 |
mA |
1, 16 |
Peak Transient Input Current
(<1 s pulse width, 300 pps) |
IF(TRAN) |
|
1.0 |
A |
|
| Reverse Input Voltage |
VR |
|
5 |
Volts |
|
| "High" Peak Output Current |
IOH(PEAK) |
|
0.6 |
A |
2, 16 |
| "Low" Peak Output Current |
IOL(PEAK) |
|
0.6 |
A |
2, 16 |
| Supply Voltage |
(VCC - VEE) |
0 |
35 |
Volts |
|
| Output Voltage |
VO(PEAK) |
0 |
VCC |
Volts |
|
| Output Power Dissipation |
PO |
|
250 |
mW |
3, 16 |
| Total Power Dissipation |
PT |
|
295 |
mW |
4, 16 |
| Lead Solder Temperature |
260 for 10 sec., 1.6 mm below seating plane |
| Solder Reflow Temperature Profile |
See Package Outline Drawings Section |
- Better Resolution
- Better Display Contrast
- Pin-to-pin compatibility
- Wide Message Display Panel With Multi lines is achievable
- Better Operating Cost
DescriptionThe HCPL-315X consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.
The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 1200 V/50 A. For IGBTs with higher ratings, the HCPL-315X can be used to drive a discrete power stage which drives the IGBT gate.
HCPL-315X consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 1200 V/50 A. For IGBTs with higher ratings, HCPL-315X can be used to drive a discrete power stage which drives the IGBT gate.
Parameters: | Technical/Catalog Information | HCPL-315J |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Type | MOSFET Driver |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (7.5mm Width) |
| Packaging | Tube |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCPL 315J
HCPL315J
516 1129 5 ND
51611295ND
516-1129-5
|
HCPL-315J Data Sheet
