HCPL-314J

Current Transfer Ratio :
Maximum Baud Rate :
Maximum Input Diode Current :
Maximum Forward Diode Voltage : 1.8 V
Maximum Reverse Diode Voltage : 5 V
Maximum Operating Temperature : + 100 C
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Power Dissipation : 260 mW
Package / Case : SOIC-16


Features:

· 0.4 A Minimum Peak Output Current
· High Speed Response: 0.7 ms Max. Propagation Delay over Temp. Range
· Ultra High CMR: Min. 10 kV/ms at VCM = 1.5 kV
· Bootstrappable Supply Current: Max. 3 mA
· Wide Operating Temp. Range: -40°C to 100°C
· Wide VCC Operating Range: 10 V to 30 V over Temp. Range
· Available in DIP8 (Single) and SO16 (Dual) Package
· Safety Approvals: UL Recognized, 3750 Vrms for 1 Minute. CSA Approval Pending. VDE Approval Pending VIORM=891 Vpeak




Application

· Isolated IGBT/Power MOSFET Gate Drive
· AC and Brushless DC Motor Drives
· Inverters for Appliances
· Industrial Inverters
· Switch Mode Power Supplies (SMPS)
· Uninterruptable Power Supplies (UPS)




Pinout






Specifications

PARAMETER	Symbol	MIN.	MAX.	UNIT	Note
Storage Temperature	TS	-55	125	°C
Operating Temperature	TA	-40	100	°C
Average Input Current	IF(AVG)		25	mA	1
Peak Transient Input Current (<1 ms pulsewidth, 300pps)	IF(TRAN)		1.0	A
Reverse Input Voltage	VR		3	V
"High" Peak Output Current	IOH(PEAK)		0.6	A	2
"Low" Peak Output Current	IOL(PEAK)		0.6	A	2
Supply Voltage	VCC-VEE	-0.5	35	V
Output Voltage	VO(PEAK)	-0.5	VCC	V
Output Power Dissipation	PO		260	mW	3
Input Power Dissipation	PI		105	mW	4
Lead Solder Temperature	260°C for 10 sec., 1.6 mm below seating plane
Solder Reflow Temperature Profile	See Package Outline Drawings section

Description

The HCPL-314J family of devices consists of an AlGaAs LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. A high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving small or medium power IGBTs.

Parameters:

Technical/Catalog Information	HCPL-314J
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Surface Mount
Package / Case	16-SOIC (7.5mm Width)
Isolation Voltage	3750Vrms
Configuration	2, One Direction
Input Type	DC
Output Type	Tri-State
Data Rate	-
Current - Output/Channel	400mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 314J HCPL314J 516 1128 5 ND 51611285ND 516-1128-5