Maximum Continuous Output Current
:
Minimum Operating Temperature
: - 40 C
Packaging
: Tube
Isolation Voltage
: 3750 Vrms
Maximum Propagation Delay Time
: 500 ns
Maximum Forward Diode Voltage
: 1.8 V
Maximum Reverse Diode Voltage
: 5 V
Maximum Forward Diode Current
: 16 mA
Maximum Operating Temperature
: + 100 C
Output Type
: Open Collector
Maximum Power Dissipation
: 295 mW
Package / Case
: DIP-8
DescriptionThe HCPL-3120-000E is one member of the HCPL-3120 family which is designed as the 2.0 amp output current IGBT gate drive optocoupler that can be used in (1)isolated IGBT/MOSFET gate drive; (2)AC and brushless DC motor drives; (3)industrial inverters; (4)switch mode power supplies (SMPS). This device consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage.
Features of the HCPL-3120-000E are:(1)2.0 A minimum peak output current;(2)15 kV/ms minimum common mode rejection (CMR) at VCM=1500 V;(3)0.5 V maximum low level output voltage (VOL) eliminates need for negative gate drive;(4)Icc = 5 mA maximum supply current;(5)under voltage lock-out protection (UVLO) with hysteresis;(6)wide operating Vcc range: 15 to 30 Volts;(7)500 ns maximum switching speeds;(8)industrial temperature range: -40°C to 100°C.
The absolute maximum ratings of the HCPL-3120-000E can be summarized as:(1)storage temperature:-55 to 125 °C;(2)operating temperature:-40 to 100 °C;(3)average input current:25 mA;(4)peak transient input current (<1 ms pulse width, 300 pps):1.0 A;(5)reverse input voltage:5 volts;(6)"high" peak output current:2.5 A;(7)"low" peak output current:2.5 A;(8)supply voltage:0 to 35 volts;(9)output voltage:0 to Vcc volts;(10)output power dissipation:250 mW;(11)total power dissipation:295 mW;(12)lead solder temperature:260°C for 10 sec., 1.6 mm below seating plane. If you want to know more information such as the electrical characteristics about the HCPL-3120-000E, please download the datasheet in www.seekic.com or www.chinaicmart.com .
Parameters: | Technical/Catalog Information | HCPL-3120-000E |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Voltage - Isolation | 3750Vrms |
| Configuration | 1, One Direction |
| Input Type | DC |
| Output Type | Push-Pull, Totem-Pole |
| Data Rate | - |
| Current - Output / Channel | 2.5A |
| Packaging | Tube |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | HCPL 3120 000E
HCPL3120000E
516 1476 5 ND
51614765ND
516-1476-5
|
HCPL-3120-000E Data Sheet
