Current Transfer Ratio
:
Maximum Baud Rate
:
Maximum Input Diode Current
:
Minimum Operating Temperature
: - 40 C
Packaging
: Tube
Maximum Operating Temperature
: + 70 C
Package / Case
: PDIP-8
Maximum Forward Diode Voltage
: 1.4 V
Maximum Reverse Diode Voltage
: 6 V
Maximum Power Dissipation
: 550 mW
DescriptionHCPL-3100-000E consists of an Silicon-doped GaAs LED optically coupled to an integrated circuit with a power output stage. This HCPL-3100-000E optocoupler is suited for driving power MOSFETs and IGBTs used in motor control inverter applications. The high operating voltage range of the output stage provides the voltage drives required by gate controlled devices. The voltage and current supplied by this optocoupler allow for direct interfacing to the power device without the need for an intermediate amplifier stage.
The HCPL-3100-000E switches a 3000 pF load in 2 ms. With a CMR rating of 5 kV/ms this HCPL-3100-000E optocoupler readily rejects transients found in inverter applications.The LED controls the state of the output stage. Transistor Q2 in the output stage is on with the LED off, allowing the base of the power device to be held low. Turning on the LED turns off Transistor Q2 and switches on Transistor Q1 in the output stage which provides current and voltage to drive the gate of the power device.
Parameters: | Technical/Catalog Information | HCPL-3100-000E |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Voltage - Isolation | 5000Vrms |
| Configuration | 1, One Direction |
| Input Type | DC |
| Output Type | Push-Pull, Totem-Pole |
| Data Rate | - |
| Current - Output / Channel | 100mA |
| Packaging | Tube |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | HCPL 3100 000E
HCPL3100000E
516 1671 5 ND
51616715ND
516-1671-5
|
HCPL-3100-000E Data Sheet
