Packaging
: Tube
Output Type
: Open Collector
Package / Case
: DIP-8
Maximum Reverse Diode Voltage
: 6 V
Isolation Voltage
: 5000 Vrms
Minimum Operating Temperature
: - 20 C
Maximum Forward Diode Current
: 20 mA
Maximum Continuous Output Current
: 0.6 A
Maximum Forward Diode Voltage
: 1.4 V
Maximum Propagation Delay Time
: 5 us
Maximum Power Dissipation
: 550 mW
Maximum Operating Temperature
: + 80 C
DescriptionHCPL-3000-000E consists of a Silicon-doped GaAs LED optically coupled to an integrated circuit with a power output stage. This HCPL-3000-000E optocoupler is suited for driving power bipolar transistors and power Darlington devices used in motor control inverter applications. The high peak and steady state current capabilities of the output stage allow for direct interfacing to the power device without the need for an intermediate amplifier stage. With a CMR rating of 1.5 kV/ms this optocoupler readily rejects transients found in inverter applications.
The LED controls the state of the output stage. Transistor Q2 in the output stage is on with the LED off, allowing the base of the power device to be held low. Turning on the LED turns off Transistor Q2 and switches on Transistor Q1 in the output stage which provides current to drive the base of a power bipolar HCPL-3000-000E device.
Parameters: | Technical/Catalog Information | HCPL-3000-000E |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Isolation Voltage | 5000Vrms |
| Configuration | 1, One Direction |
| Input Type | DC |
| Output Type | Open Collector |
| Data Rate | - |
| Current - Output/Channel | 500mA |
| Packaging | Tube |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | HCPL 3000 000E
HCPL3000000E
516 1670 5 ND
51616705ND
516-1670-5
|
HCPL-3000-000E Data Sheet
