HCPL-263A

Current Transfer Ratio :
Maximum Input Diode Current :
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Reverse Diode Voltage : 3 V
Maximum Operating Temperature : + 85 C
Maximum Baud Rate : 10 MBps
Maximum Power Dissipation : 60 mW
Package / Case : PDIP-8
Maximum Forward Diode Voltage : 1.6 V


Features:

• HCMOS/LSTTL/TTL Performance Compatible
• 1000 V/ms Minimum Common Mode Rejection (CMR) at VCM = 50 V (HCPL- 261A Family) and 15 kV/ms Minimum CMR at VCM = 1000 V (HCPL-261N Family)
• High Speed: 10 MBd Typical
• AC and DC Performance Specified over Industrial Temperature Range -40°C to +85°C
• Available in 8 Pin DIP, SOIC-8 Packages
• Safety Approval UL Recognized per UL1577 2500 V rms for 1 minute and 5000 V rms for 1 minute (Option 020) CSA Approved
VDE 0884 Approved with
VIORM = 630 V peak for
HCPL-261A/261N
Option 060




Application

• Low Input Current (3.0 mA) HCMOS Compatible Version of 6N137 Optocoupler
• Isolated Line Receiver
• Simplex/Multiplex Data Transmission
• Computer-Peripheral Interface
• Digital Isolation for A/D, D/A Conversion
• Switching Power Supplies
• Instrumentation Input/Output Isolation
• Ground Loop Elimination
• Pulse Transformer Replacement




Pinout

Specifications

Parameter	Symbol	Min.	Max.	Units	Note
Storage Temperature	TS	-55	125	°C
Operating Temperature	TA	-40	+85	°C
Operating Temperature	I F(AVG)		10	mA	1
Reverse Input Voltage	VR		3	Volts
Supply Voltage	VCC	-0.5	7	Volts	2
Enable Input Voltage	VE	-0.5	5.5	Volts
Output Collector Current (Each Channel)	IO		50	mA
Output Power Dissipation (Each Channel)	PO		60	mW	3
Output Voltage (Each channel)	VO	-0.5	7	Volts
Lead Solder Temperature (Through Hole Parts Only)	260°C for 10 s, 1.6 mm Below Seating Plane
Solder Reflow Temperature Profile (Surface Mount Parts Only)	See Package Outline Drawings section

Description

The HCPL-263A is one member of the HCPL-26xx family which designed as the high CMR, high speed TTL compatible optocoupler that can be used in (1)Isolated line receiver; (2)computer-peripheral interfaces; (3)microprocessor system interfaces; (4)digital isolation for A/D, D/A conversion; (5)switching power supply; (6)instrument input/output isolation; (7)ground loop elimination; (8)pulse transformer replacement; (9)power transistor isolation in motor drives; (10)isolation of high speed logic systems.

Features of the HCPL-263A are:(1)high speed:10 MBd typical;(2)LSTTL/TTL compatible;(3)low input current capability:5 mA;(4)guaranteed ac and dc perform-ance over temperature:-40°C to +85°C;(5)available in 8-pin DIP, SOIC-8, widebody packages;(6)strobable output (single channel products only);(7)MIL-PRF-38534 hermetic version available.

The absolute maximum ratings of the HCPL-263A can be summarized as:(1)storage temperature:-55 to 125°C;(2)operating temperature:-40 to 85°C;(3)average forward input current (single 8-pin DIP, single SO-8, widebody):20 mA;(4)average forward input current (dual 8-pin DIP, dual SO-8):15 mA;(5)input power dissipation:40 mW;(6)supply voltage (1 minute maximum):7 V. If you want to know more information such as the electrical characteristics about the HCPL-263A, please download the datasheet in www.seekic.com or www.chinaicmart.com .

The HCPL-263A family of optically coupled gates provide all the benefits of the industry standard 6N137 family with the added benefit of HCMOS compatible input current. This allows direct interface to all common circuit topologies without additional LED buffer or drive components. The AlGaAs LED used allows lower drive currents and reduces degradation by using the latest LED technology. On the single channel parts, an enable output allows the detector to be strobed. The output of the detector IC is an open collector schottky-clamped transistor. The internal shield provides a minimum common mode transient immunity of 1000 V/ms for the HCPL-261A family and 15000 V/ms for the HCPL-263A family.

Parameters:

Technical/Catalog Information	HCPL-263A
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP
Isolation Voltage	3750Vrms
Configuration	2, One Direction
Input Type	DC
Output Type	Open Collector
Data Rate	10Mbs
Current - Output/Channel	50mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 263A HCPL263A 516 1094 5 ND 51610945ND 516-1094-5