HCPL-2430-000E

Current Transfer Ratio :
Maximum Input Diode Current :
Packaging : Tube
Maximum Forward Diode Voltage : 1.5 V
Maximum Operating Temperature : + 70 C
Minimum Operating Temperature : 0 C
Maximum Baud Rate : 40 MBps
Maximum Reverse Diode Voltage : 2 V
Maximum Power Dissipation : 350 mW
Package / Case : PDIP-8


Description

The HCPL-2430-000E is designed as one kind of 20 MBd high CMR logic gate optocoupler that can be used in (1)isolation of high speed logic systems; (2)computer-peripheral interfaces; (3)switching power supplies; (4)isolated bus driver (networking applications); (5)ground loop elimination; (6)high speed disk drive I/O; (7)digital isolation for A/D, D/A conversion; (8)pulse transformer replacement. The totem pole output of this device eliminates the need for a pull up resistor and allows for direct drive of data buses.

Features of the HCPL-2430-000E are:(1)high speed: 40 MBd typical data rate; (2)high common mode rejection: HCPL-2400: 10 kV/ms at VCM = 300 V (Typical); (3)AC performance guaranteed over temperature; (4)high speed AlGaAs emitter; (5)compatible with TTL, STTL, LSTTL, and HCMOS logic families; (6)totem pole and tri state output (no pull up resistor required); (7)high power supply noise immunity; (8)MIL-STD-1772 version available.

The absolute maximum ratings of the HCPL-2430-000E can be summarized as:(1)Storage Temperature: -55 to 125 °C;(2)Operating Temperature: -40 to 85 °C;(3)Average Forward Input Current: 10 mA;(4)Peak Forward Input Current: 20 mA;(5)Reverse Input Voltage: 2 V;(6)Supply Voltage: 0 to 7 V;(7)Average Output Collector Current: -25 to 25 mA;(8)Output Collector Voltage: -0.5 to 10 V;(9)Output Voltage: -0.5 to 18 V;(10)Output Collector Power Dissipation (Each Channel): 40 mW;(11)Total Package Power Dissipation (Each Channel): 350 mW.

The electrical characteristics of HCPL-2430-000E can be summarized as:(1)Logic Low Output Voltage: 0.5 V;(2)Output Leakage Current: 100 uA;(3)Logic High Enable Current: 2.0 V;(4)Logic Low Enable Voltage: 0.8 V;(5)Logic Low Enable Current: -0.28 to -0.4 mA;(6)High Impedance State Supply Current: 22 to 28 mA;(7)Logic Low Short Circuit Output Current: 52 mA;(8)Logic High Short Circuit Output Current: -45 mA;(9)Input Current Hysteresis: 0.25 mA;(10)Input Capacitance: 20 pF. If you want to know more information about it, please download the datasheet in www.seekic.com or www.chinaicmart.com .

Parameters:

Technical/Catalog Information	HCPL-2430-000E
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP
Isolation Voltage	3750Vrms
Configuration	2, One Direction
Input Type	DC
Output Type	Open Collector
Data Rate	40Mbs
Current - Output/Channel	25mA
Packaging	Tube
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	HCPL 2430 000E HCPL2430000E 516 1539 5 ND 51615395ND 516-1539-5