Maximum Baud Rate
:
Maximum Forward Diode Voltage
: 1.8 V
Minimum Operating Temperature
: - 40 C
Packaging
: Tube
Maximum Input Diode Current
: 25 mA
Maximum Power Dissipation
: 100 mW
Maximum Reverse Diode Voltage
: 3 V
Maximum Operating Temperature
: + 85 C
Package / Case
: PDIP-8
Current Transfer Ratio
: 52 %
Features: • Wide Bandwidth[1]: 17 MHz (HCPL-4562) 9 MHz (HCNW4562)
• High Voltage Gain[1]: 2.0 (HCPL-4562) 3.0 (HCNW4562)
• Low GV Temperature Coefficient: -0.3%/°C
• Highly Linear at Low Drive Currents
• High-Speed AlGaAs Emitter
• Safety Approval
UL Recognized - 2500 V rms
for 1 minute (5000 V rms for 1 minute for HCPL- 4562#020 and HCNW4562) per UL 1577
CSA Approved
VDE 0884 Approved -VIORM = 1414 Vpeak for HCNW4562 BSI Certified (HCNW4562)
• Available in 8-Pin DIP and Widebody PackagesApplication• Video Isolation for the Following Standards/ Formats: NTSC, PAL, SECAM, S-VHS, ANALOG RGB
• Low Drive Current Feedback Element in Switching Power Supplies, e.g., for ISDN Networks
• A/D Converter Signal Isolation
• Analog Signal Ground Isolation
• High Voltage Insulation
Pinout
Specifications
| Parameter |
Symbol |
Device |
Min. |
Max. |
Units |
Note |
| Storage Temperature |
TS |
|
-55 |
125 |
°C |
|
| Operating Temperature |
TA |
|
-40 |
85 |
°C |
|
| Average Forward Input Current |
IF(avg) |
HCPL-4562
HCNW4562 |
|
12
25 |
mA |
|
| Peak Forward Input Current |
IF(PEAK) |
HCPL-4562
HCNW4562 |
|
18.6
40 |
mA |
|
| Effective Input Current |
IF(EFF) |
HCPL-4562
|
|
1.29 |
mA rms |
|
| Reverse LED Input Voltage (Pin 3-2) |
VR |
HCPL-4562
HCNW4562 |
|
1.8
3 |
v |
|
| Input Power Dissipation |
PIN |
HCNW4562 |
|
40 |
mw |
|
| Average Output Current (Pin 6) |
IO(AVG) |
|
|
8 |
mA |
|
| Peak Output Current (Pin 6) |
IO(PEAK) |
|
|
16 |
mA |
|
| Emitter-Base Reverse Voltage (Pin 5-7) |
VEBR |
|
|
5 |
V |
|
| Supply Voltage (Pin 8-5) |
VCC |
|
-0.3 |
30 |
V |
|
| Output Voltage (Pin 6-5) |
VO |
|
-0.3 |
20 |
V |
|
| Base Current (Pin 7) |
IB |
|
|
5 |
MA |
|
| Output Power Dissipation |
PO |
|
|
100 |
MW |
2 |
Lead Solder Temperature
1.6 mm Below Seating Plane, 10 Seconds
up to Seating Plane, 10 Seconds |
TLS |
HCPL-4562
HCNW4562 |
|
260
260 |
°C
°C |
|
| Reflow Temperature Profile |
TRP |
Option
300 |
Drawings Section
See Package Outline |
|
DescriptionThe HCPL-4562 and HCNW4562 optocouplers provide wide bandwidth isolation for analog signals. They are ideal for video isolation when combined with their application circuit (Figure 4). High linearity and low phase shift are achieved through an AlGaAs LED combined with a high speed detector. These HCPL-4562 and HCNW4562 single channel optocouplers are available in 8-Pin DIP and Widebody package configurations.
Parameters: | Technical/Catalog Information | HCNW4562 |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Isolation Voltage | 5000Vrms |
| Input Type | DC |
| Output Type | Transistor with Vcc |
| Current - Output/Channel | 8mA |
| Voltage - Output | 20V |
| Vce Saturation (Max) | - |
| Current Transfer Ratio (Min) | 52% @ 10mA |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP Wide |
| Packaging | Tube |
| Number of Circuits | 1 - Single |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCNW4562
HCNW4562
516 1050 5 ND
51610505ND
516-1050-5
|
HCNW4562 Data Sheet
