HCA10014

Features:

• MOSFET Input Stage Provides:
         - Very High ZI = 1.5TW (1.5 x 1012W) (Typ)
         - Very Low II
         15V Operation. . . . . . . . . . . . . . . . . . . . . . . . . 5pA (Typ)
         5V Operation. . . . . . . . . . . . . . . . . . . . . . . . . . 2pA (Typ)
• Ideal for Single Supply Applications
• Common Mode Input Voltage Range Includes
         Negative Supply Rail; Input Terminals can be Swung 0.5V Below Negative Supply Rail
• CMOS Output Stage Permits Signal Swing to Either (or both) Supply Rails


Application

• Ground Referenced Single Supply Amplifiers
• Fast Sample and Hold Amplifiers
• Long Duration Timers/Monostables
• High Input Impedance Comparators (Ideal Interface with Digital CMOS)
• High Input Impedance Wideband Amplifiers
• Voltage Followers (e.g., Follower for Single Supply D/A Converter)
• Voltage Regulators (Permits Control of Output Voltage Down to 0V)
• Peak Detectors
• Single Supply Full Wave Precision Rectifiers
• Photo Diode Sensor Amplifiers


Pinout




Specifications

DC Supply Voltage (Between V+ and V- Terminals) . . . . . . . . . .16V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8V
DC Input Voltage . . . . . . . . . . . . . . . . . . . . . . (V+ +8V) to (V- -0.5V)
Input Terminal Current . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 1mA
Output Short Circuit Duration (Note 1). . . . . . . . . . . . . . . . Indefinite


Description

HCA10014 op amp combines the advantage of both CMOS and bipolar transistors.

Gate protected P-Channel MOSFET (PMOS) transistors are used in the input circuit to provide very high input impedance, very low input current, and exceptional speed performance. The use of HCA10014 PMOS transistors in the input stage results in common mode input voltage capability down to 0.5V below the negative supply terminal, an important attribute in single supply applications.

A HCA10014 CMOS transistor pair, capable of swinging the output voltage to within 10mV of either supply voltage terminal (at very high values of load impedance), is employed as the output circuit.

The HCA10014 operates at supply voltages ranging from 5V to 16V, (±2.5V to ±8V). It can be phase compensated with a single external capacitor, and have terminals for adjustment of offset voltage for applications requiring offset null capability. Terminal provisions are also made to permit strobing of the output stage.