HA5022/883

• This Circuit is Processed in Accordance to MIL-STD- 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
• Dual Version of HA-5020
• Individual Output Enable/Disable
• Wide Unity Gain Bandwidth . . . . . . . . . . . . . . . 125MHz
• Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475V/ms
• Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.03%
• Differential Phase. . . . . . . . . . . . . . . . . . . . . . . 0.03 Deg.
• Supply Current (per Amplifier) . . . . . . . . . . . . . . .7.5mA
• Crosstalk Rejection at 10MHz. . . . . . . . . . . . . . . . -60dB
• ESD Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . .2000V
• Guaranteed Specifications at ±5V Supplies

Absolute Maximum Ratings Thermal Information
Voltage Between V+ and V- . . . . . . . . . . . . . . . . . . . 36V
Differential Input Voltage . . . . . . . . . . .. . . .. . . . . . . 10V
Voltage at Either Input Terminal . . . . ... . V+ to VOutput
Current . . . . . . . . . . . . . .  . . Full Short Circuit Protected
Junction Temperature. . . . . . . . . . . . . . . . . . . . . +175^oC
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . .. . . . . .< 2000V
Storage Temperature Range . . . . -65oC T_A +150^oC
Lead Temperature (Soldering 10s) . . . . . . . . . . +300^oC
Thermal Resistance _{JA JC}
CerDIP Package . . . . . . . . . . . . . . . . . 75^oC/W 20^oC/W
Maximum Package Power Dissipation at +75^oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . 1.33W
Package Power Dissipation Derating Factor above +75^oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . 13.3mW/^oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operationof the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Supply Voltage (±V_S) . . . . . . . ±5V to ±15V
Operating Temperature Range. . .-55^oC TA +125^oC
V_INCM 1/2(V+ - V-) R_L 50
V_DISABLE = V+ or 0V R_F = 1k

The HA5022/883 is a dual version of the popular Intersil HA- 5020. It features wide bandwidth and high slew rate, and is optimized for video applications and gains between 1 and 10. It is a current feedback amplifier and thus yields less bandwidth degradation at high closed loop gains than voltage feedback amplifiers.

The low differential gain and phase, 0.1dB gain flatness, andability to drive two back terminated 75W cables, make HA5022/883 amplifier ideal for demanding video applications.

The HA5022/883 also features a disable function that significantly reduces supply current while forcing the output to a true high impedance state. This functionality allows 2:1 video multiplexers to be implemented with a single IC.

The current feedback design of HA5022/883 allows the user to take advantage of the amplifier's bandwidth dependency on the feedback resistor. By reducing R_F , the bandwidth can be increased to compensate for decreases at higher closed loop gains or heavy output loads.